KingSpec P3-512-FB 512GB 2.5" SATA III internal SSD
- Internal Solid Stat…
- Consumer
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
KingSpec
A 2.5" SATA III solid-state drive with 1TB capacity, sequential reads up to 560 MB/s, writes up to 530 MB/s, and 480 TBW endurance
Options P3-1TB
The KingSpec P3-1TB is a 2.5 inch internal solid state drive with a 1TB capacity and a SATA III interface. It uses 3D NAND flash memory and delivers sequential read speeds up to 560 MBps and write speeds up to 530 MBps. Random performance reaches 65000 IOPS read and 70000 IOPS write.
Verify that your system has a free 2.5 inch drive bay and a SATA data cable connected to a SATA III port for full speed. Confirm the power supply provides a SATA power connector for the drive's 0.41W idle draw. Ensure the operating system supports TRIM and NCQ to maintain performance and endurance.
This drive suits users upgrading a laptop or desktop that relies on the SATA interface and needs 1TB of reliable storage with 480TB TBW endurance. It is not suited for builds requiring an M.2 form factor or PCIe based throughput.
| Brand | KingSpec |
|---|---|
| Series | P3 Series |
| Model | P3-1TB |
| Part Number | P3-1TB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | SATA III |
| Protocol | SATA |
| Max Sequential Read | Up to 560 MBps |
| Max Sequential Write | Up to 530 MBps |
| 4KB Random Read | Up to 65,000 IOPS |
| 4KB Random Write | Up to 70,000 IOPS |
| Terabytes Written (TBW) | 480TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Features | 1.SATA 6Gbps interface; 2. Support wear leveling; 3. Support Garbage collection; 4. Support Over-provisioning; 5. Support Native Command Queuing (NCQ); 6. Support TRIM; 7.Support S.M.A.R.T. ; |
| Power Consumption (Idle) | 0.41W |
| Power Consumption (Active) | 1.85W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +75°C |
| Operating Humidity | 5-95% |
| Height | 7.00mm |
| Width | 70.00mm |
| Depth | 100.4mm |
| Weight | 50g |
Andere versies van dit model
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
The drive is supplied as a bare 2.5" SATA III unit; mounting brackets and data cables are not included and must be sourced separately.
The P3 series is offered in capacities up to 8TB, so the 1TB model is the entry point and larger drives can be chosen if more space is needed.
On a SATA III connection the drive can reach 560 MB/s read and 530 MB/s write, cutting boot and application load times to roughly one quarter of a traditional hard drive.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?