Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Large galvanized-steel CO2 laser engraver 55 by 35 in with water chiller and air assist

VEVOR

VEVOR SH-1490 130W CO2 Laser Engraver 55 x 35 in

SKU CH-23GH-K0KF2

A 130W CO2 laser engraver with a 55 x 35 in work area, 1200 mm/s speed and integrated water chiller

  • TypeOther Appliances
  • 130 W laser power cuts thick wood and acrylic
  • 1200 mm/s engraving speed finishes jobs quickly
  • 55 x 35 in bed handles large-format projects
  • Built-in water chiller keeps tube temperature stable
  • Autofocus with 18 mm focal length simplifies setup

130W CO2 Laser Engraver for Large-Format Work

The VEVOR SH-1490 is a 130W CO2 laser engraver built on a galvanized steel frame. It offers a 55 by 35 inch work area suited for cutting and engraving wood, acrylic and glass. Makers and small workshops gain a high-power tool for large-format projects.

1200 mm/s Engraving Speed for Throughput

The engraver reaches an engraving speed of 1200 mm/s or 47.2 in/s. That single figure determines whether the machine meets production-volume needs. Buyers who need slower, finer detail work or a lower power rating will find this specification excessive.

Water Chiller and Air Assist Included

A water chiller and water pump are bundled to maintain stable tube temperature during long runs. The two-way pass air assist clears debris from the cut path. These accessories reduce the need for separate cooling or air systems.

Istaknuto

  • 130 W laser power cuts thick wood and acrylic
  • 1200 mm/s engraving speed finishes jobs quickly
  • 55 x 35 in bed handles large-format projects
  • Built-in water chiller keeps tube temperature stable
  • Autofocus with 18 mm focal length simplifies setup

Specifikacije

TypeOther Appliances

Pitanja o ovom artiklu

What does the 130 W laser power mean for cutting thicker material in a real job?

The 130 W tube gives enough energy to cut through thicker wood, acrylic and similar non-metal sheets in fewer passes than lower-power machines, reducing overall job time.

How does the 1200 mm/s engraving speed translate to actual throughput?

At 1200 mm/s the gantry can traverse the full 55 x 35 in bed quickly, so large raster jobs finish faster, though vector cutting runs slower to maintain edge quality.

What clearance does the 55 x 35 in galvanized-steel frame need for installation?

The machine footprint matches the 55 x 35 in work area, so you need at least that much clear floor space plus room for the separate water chiller and ventilation ducting.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.