暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Large galvanized-steel CO2 laser engraver 55 by 35 in with water chiller and air assist

VEVOR

VEVOR SH-1490 130W CO2 Laser Engraver 55 x 35 in

SKU CH-23GH-K0KF2

A 130W CO2 laser engraver with a 55 x 35 in work area, 1200 mm/s speed and integrated water chiller

  • TypeOther Appliances
  • 130 W laser power cuts thick wood and acrylic
  • 1200 mm/s engraving speed finishes jobs quickly
  • 55 x 35 in bed handles large-format projects
  • Built-in water chiller keeps tube temperature stable
  • Autofocus with 18 mm focal length simplifies setup

130W CO2 Laser Engraver for Large-Format Work

The VEVOR SH-1490 is a 130W CO2 laser engraver built on a galvanized steel frame. It offers a 55 by 35 inch work area suited for cutting and engraving wood, acrylic and glass. Makers and small workshops gain a high-power tool for large-format projects.

1200 mm/s Engraving Speed for Throughput

The engraver reaches an engraving speed of 1200 mm/s or 47.2 in/s. That single figure determines whether the machine meets production-volume needs. Buyers who need slower, finer detail work or a lower power rating will find this specification excessive.

Water Chiller and Air Assist Included

A water chiller and water pump are bundled to maintain stable tube temperature during long runs. The two-way pass air assist clears debris from the cut path. These accessories reduce the need for separate cooling or air systems.

特長

  • 130 W laser power cuts thick wood and acrylic
  • 1200 mm/s engraving speed finishes jobs quickly
  • 55 x 35 in bed handles large-format projects
  • Built-in water chiller keeps tube temperature stable
  • Autofocus with 18 mm focal length simplifies setup

仕様

TypeOther Appliances

この商品に関する質問

What does the 130 W laser power mean for cutting thicker material in a real job?

The 130 W tube gives enough energy to cut through thicker wood, acrylic and similar non-metal sheets in fewer passes than lower-power machines, reducing overall job time.

How does the 1200 mm/s engraving speed translate to actual throughput?

At 1200 mm/s the gantry can traverse the full 55 x 35 in bed quickly, so large raster jobs finish faster, though vector cutting runs slower to maintain edge quality.

What clearance does the 55 x 35 in galvanized-steel frame need for installation?

The machine footprint matches the 55 x 35 in work area, so you need at least that much clear floor space plus room for the separate water chiller and ventilation ducting.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。