LONGER
LONGER Laser Engraver Enclosure with Vent 27.5 x 27.5 x 13 inches
- Laser Engraver
US$69.99
0.00088832BTC
재고 있음
VEVOR
VEVOR SH-1490 130W CO2 Laser Engraver 55 x 35 in
A 130W CO2 laser engraver with a 55 x 35 in work area, 1200 mm/s speed and integrated water chiller
- TypeOther Appliances
- 130 W laser power cuts thick wood and acrylic
- 1200 mm/s engraving speed finishes jobs quickly
- 55 x 35 in bed handles large-format projects
- Built-in water chiller keeps tube temperature stable
- Autofocus with 18 mm focal length simplifies setup
130W CO2 Laser Engraver for Large-Format Work
The VEVOR SH-1490 is a 130W CO2 laser engraver built on a galvanized steel frame. It offers a 55 by 35 inch work area suited for cutting and engraving wood, acrylic and glass. Makers and small workshops gain a high-power tool for large-format projects.
1200 mm/s Engraving Speed for Throughput
The engraver reaches an engraving speed of 1200 mm/s or 47.2 in/s. That single figure determines whether the machine meets production-volume needs. Buyers who need slower, finer detail work or a lower power rating will find this specification excessive.
Water Chiller and Air Assist Included
A water chiller and water pump are bundled to maintain stable tube temperature during long runs. The two-way pass air assist clears debris from the cut path. These accessories reduce the need for separate cooling or air systems.
주요 특징
- 130 W laser power cuts thick wood and acrylic
- 1200 mm/s engraving speed finishes jobs quickly
- 55 x 35 in bed handles large-format projects
- Built-in water chiller keeps tube temperature stable
- Autofocus with 18 mm focal length simplifies setup
사양
| Type | Other Appliances |
|---|
이 상품에 대한 질문
What does the 130 W laser power mean for cutting thicker material in a real job?
The 130 W tube gives enough energy to cut through thicker wood, acrylic and similar non-metal sheets in fewer passes than lower-power machines, reducing overall job time.
How does the 1200 mm/s engraving speed translate to actual throughput?
At 1200 mm/s the gantry can traverse the full 55 x 35 in bed quickly, so large raster jobs finish faster, though vector cutting runs slower to maintain edge quality.
What clearance does the 55 x 35 in galvanized-steel frame need for installation?
The machine footprint matches the 55 x 35 in work area, so you need at least that much clear floor space plus room for the separate water chiller and ventilation ducting.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
