We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Large galvanized-steel CO2 laser engraver 55 by 35 in with water chiller and air assist

VEVOR

VEVOR SH-1490 130W CO2 Laser Engraver 55 x 35 in

SKU CH-23GH-K0KF2

A 130W CO2 laser engraver with a 55 x 35 in work area, 1200 mm/s speed and integrated water chiller

  • TypeOther Appliances
  • 130 W laser power cuts thick wood and acrylic
  • 1200 mm/s engraving speed finishes jobs quickly
  • 55 x 35 in bed handles large-format projects
  • Built-in water chiller keeps tube temperature stable
  • Autofocus with 18 mm focal length simplifies setup

130W CO2 Laser Engraver for Large-Format Work

The VEVOR SH-1490 is a 130W CO2 laser engraver built on a galvanized steel frame. It offers a 55 by 35 inch work area suited for cutting and engraving wood, acrylic and glass. Makers and small workshops gain a high-power tool for large-format projects.

1200 mm/s Engraving Speed for Throughput

The engraver reaches an engraving speed of 1200 mm/s or 47.2 in/s. That single figure determines whether the machine meets production-volume needs. Buyers who need slower, finer detail work or a lower power rating will find this specification excessive.

Water Chiller and Air Assist Included

A water chiller and water pump are bundled to maintain stable tube temperature during long runs. The two-way pass air assist clears debris from the cut path. These accessories reduce the need for separate cooling or air systems.

Highlights

  • 130 W laser power cuts thick wood and acrylic
  • 1200 mm/s engraving speed finishes jobs quickly
  • 55 x 35 in bed handles large-format projects
  • Built-in water chiller keeps tube temperature stable
  • Autofocus with 18 mm focal length simplifies setup

Specifications

TypeOther Appliances

Questions about this item

What does the 130 W laser power mean for cutting thicker material in a real job?

The 130 W tube gives enough energy to cut through thicker wood, acrylic and similar non-metal sheets in fewer passes than lower-power machines, reducing overall job time.

How does the 1200 mm/s engraving speed translate to actual throughput?

At 1200 mm/s the gantry can traverse the full 55 x 35 in bed quickly, so large raster jobs finish faster, though vector cutting runs slower to maintain edge quality.

What clearance does the 55 x 35 in galvanized-steel frame need for installation?

The machine footprint matches the 55 x 35 in work area, so you need at least that much clear floor space plus room for the separate water chiller and ventilation ducting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.