Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Black 97mm blower fan with 3-wire power connector

Zyvpee

Zyvpee F9733B12LE 97mm 12V 0.72A 3-wire blower case fan

SKU CH-YDXY-FVQJC

A 97 mm blower fan with a 3-wire power connector runs on 12 V and draws 0.72 A

  • TypeCase Fan
  • CompatibilityCase
  • Fan Size100mm
  • Bearing TypeBall
  • Power Connector3 wires
  • ColorBlack
  • Blower design targets airflow through tight spaces
  • 12 V 0.72 A draws modest power from a 3-wire header
  • Ball bearing supports continuous operation with reduced friction
  • 97 mm by 33 mm frame fits compact 100 mm mounts
  • Non-LED black finish keeps the build visually clean

Compact blower for tight cases

The Zyvpee F9733B12LE is a 97 mm by 33 mm blower fan built for small-form-factor cases. It runs on 12 V and draws 0.72 A through a standard 3-wire power connector. The ball-bearing motor and non-LED black frame suit builders who need directed airflow without lighting.

Replaces larger axial fans when space is limited

Swap this blower in when a 100 mm axial fan cannot fit or when components block straight-through airflow. The 10 cm blower wheel pushes air across heatsinks and voltage-regulator zones that traditional fans miss. The upgrade is worth it when clearance is under 33 mm or when ducting is required.

Simple three-wire fit with polarity care

Mount the 97 mm square frame using the four corner holes and plug the 3-wire connector into any 12 V fan header. The 10 cm lead is short, so plan routing before final assembly. The common mistake is reversing the yellow sense wire, which stops speed reporting but not rotation.

Istaknuto

  • Blower design targets airflow through tight spaces
  • 12 V 0.72 A draws modest power from a 3-wire header
  • Ball bearing supports continuous operation with reduced friction
  • 97 mm by 33 mm frame fits compact 100 mm mounts
  • Non-LED black finish keeps the build visually clean

Specifikacije

BrandZyvpee
SeriesF9733
ModelF9733B12LE
TypeCase Fan
CompatibilityCase
Fan Size100mm
Bearing TypeBall
Power Connector3 wires
ColorBlack
LEDNon-LED
FeaturesDC blower
Dimensions97 * 33mm
Package Contentsrefer to title

Pitanja o ovom artiklu

Will the 97 mm by 33 mm frame fit my case's blower slot?

The fan measures 97 mm square by 33 mm thick, so verify your case has a matching cut-out and mounting holes before ordering.

How do I connect the 3-wire power lead correctly?

Plug the 3-wire connector into a 12 V fan header on the motherboard or controller; the third wire carries the tachometer signal for speed monitoring.

When should I expect to service the ball bearing?

Ball bearings typically run for years; clean dust from the blower fins periodically and replace the fan if noise or vibration increases.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.