Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Black 97mm blower fan with 3-wire power connector

Zyvpee

Zyvpee F9733B12LE 97mm 12V 0.72A 3-wire blower case fan

SKU CH-YDXY-FVQJC

A 97 mm blower fan with a 3-wire power connector runs on 12 V and draws 0.72 A

  • TypeCase Fan
  • CompatibilityCase
  • Fan Size100mm
  • Bearing TypeBall
  • Power Connector3 wires
  • ColorBlack
  • Blower design targets airflow through tight spaces
  • 12 V 0.72 A draws modest power from a 3-wire header
  • Ball bearing supports continuous operation with reduced friction
  • 97 mm by 33 mm frame fits compact 100 mm mounts
  • Non-LED black finish keeps the build visually clean

Compact blower for tight cases

The Zyvpee F9733B12LE is a 97 mm by 33 mm blower fan built for small-form-factor cases. It runs on 12 V and draws 0.72 A through a standard 3-wire power connector. The ball-bearing motor and non-LED black frame suit builders who need directed airflow without lighting.

Replaces larger axial fans when space is limited

Swap this blower in when a 100 mm axial fan cannot fit or when components block straight-through airflow. The 10 cm blower wheel pushes air across heatsinks and voltage-regulator zones that traditional fans miss. The upgrade is worth it when clearance is under 33 mm or when ducting is required.

Simple three-wire fit with polarity care

Mount the 97 mm square frame using the four corner holes and plug the 3-wire connector into any 12 V fan header. The 10 cm lead is short, so plan routing before final assembly. The common mistake is reversing the yellow sense wire, which stops speed reporting but not rotation.

Punti di forza

  • Blower design targets airflow through tight spaces
  • 12 V 0.72 A draws modest power from a 3-wire header
  • Ball bearing supports continuous operation with reduced friction
  • 97 mm by 33 mm frame fits compact 100 mm mounts
  • Non-LED black finish keeps the build visually clean

Caratteristiche tecniche

BrandZyvpee
SeriesF9733
ModelF9733B12LE
TypeCase Fan
CompatibilityCase
Fan Size100mm
Bearing TypeBall
Power Connector3 wires
ColorBlack
LEDNon-LED
FeaturesDC blower
Dimensions97 * 33mm
Package Contentsrefer to title

Domande su questo articolo

Will the 97 mm by 33 mm frame fit my case's blower slot?

The fan measures 97 mm square by 33 mm thick, so verify your case has a matching cut-out and mounting holes before ordering.

How do I connect the 3-wire power lead correctly?

Plug the 3-wire connector into a 12 V fan header on the motherboard or controller; the third wire carries the tachometer signal for speed monitoring.

When should I expect to service the ball bearing?

Ball bearings typically run for years; clean dust from the blower fins periodically and replace the fan if noise or vibration increases.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.