Zyvpee
Zyvpee F9733B12LE 97mm 12V 0.72A 3-wire blower case fan
A 97 mm blower fan with a 3-wire power connector runs on 12 V and draws 0.72 A
- TypeCase Fan
- CompatibilityCase
- Fan Size100mm
- Bearing TypeBall
- Power Connector3 wires
- ColorBlack
- Blower design targets airflow through tight spaces
- 12 V 0.72 A draws modest power from a 3-wire header
- Ball bearing supports continuous operation with reduced friction
- 97 mm by 33 mm frame fits compact 100 mm mounts
- Non-LED black finish keeps the build visually clean
Compact blower for tight cases
The Zyvpee F9733B12LE is a 97 mm by 33 mm blower fan built for small-form-factor cases. It runs on 12 V and draws 0.72 A through a standard 3-wire power connector. The ball-bearing motor and non-LED black frame suit builders who need directed airflow without lighting.
Replaces larger axial fans when space is limited
Swap this blower in when a 100 mm axial fan cannot fit or when components block straight-through airflow. The 10 cm blower wheel pushes air across heatsinks and voltage-regulator zones that traditional fans miss. The upgrade is worth it when clearance is under 33 mm or when ducting is required.
Simple three-wire fit with polarity care
Mount the 97 mm square frame using the four corner holes and plug the 3-wire connector into any 12 V fan header. The 10 cm lead is short, so plan routing before final assembly. The common mistake is reversing the yellow sense wire, which stops speed reporting but not rotation.
Points forts
- Blower design targets airflow through tight spaces
- 12 V 0.72 A draws modest power from a 3-wire header
- Ball bearing supports continuous operation with reduced friction
- 97 mm by 33 mm frame fits compact 100 mm mounts
- Non-LED black finish keeps the build visually clean
Caractéristiques
| Brand | Zyvpee |
|---|---|
| Series | F9733 |
| Model | F9733B12LE |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 100mm |
| Bearing Type | Ball |
| Power Connector | 3 wires |
| Color | Black |
| LED | Non-LED |
| Features | DC blower |
| Dimensions | 97 * 33mm |
| Package Contents | refer to title |
Questions sur cet article
Will the 97 mm by 33 mm frame fit my case's blower slot?
The fan measures 97 mm square by 33 mm thick, so verify your case has a matching cut-out and mounting holes before ordering.
How do I connect the 3-wire power lead correctly?
Plug the 3-wire connector into a 12 V fan header on the motherboard or controller; the third wire carries the tachometer signal for speed monitoring.
When should I expect to service the ball bearing?
Ball bearings typically run for years; clean dust from the blower fins periodically and replace the fan if noise or vibration increases.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $US
0.00001044BTC
En stock