SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Maxtor
A 250 GB 3.5" desktop hard drive with 7200 RPM, 16 MB cache and SATA 1.5 Gb/s interface
The Maxtor DiamondMax 10 6L250S0 is a 250GB 3.5-inch internal hard drive built for desktop computers. It connects through a SATA 1.5Gb/s interface and spins at 7200 RPM with a 16MB cache. The drive suits users who need affordable bulk storage for documents, media and backups.
A fluid dynamic bearing motor keeps acoustic output low during normal desktop use. Average seek time is 9ms and average latency is 4.17ms, so typical file access feels responsive. Native command queuing helps the controller order requests efficiently. The drive meets RoHS requirements and includes Shock Protection System and Data Protection System features.
Sustained read and write performance remains steady because the 7200 RPM spindle speed does not throttle under continuous load. The 16MB buffer absorbs bursts without forcing the platters to wait. Buyers who need higher capacities or faster interfaces should consider other models.
| Brand | Maxtor |
|---|---|
| Series | DiamondMax 10 |
| Model | 6L250S0 |
| Packaging | Bare Drive |
| Interface | SATA 1.5Gb/s |
| Capacity | 250GB |
| RPM | 7200 RPM |
| Cache | 16MB |
| Average Seek Time | 9ms |
| Average Latency | 4.17ms |
| Features | Native command queuing Fluid dynamic bearing motor for quiet operation RoHS compliant Improved reliability with: Shock Protection System Data Protection System |
| Form Factor | 3.5" |
| Szállítási súly | 0.70 kg |
| Csomagméret | 203 × 152 × 51 mm |
Mount the drive in a 3.5" bay, attach a SATA data cable and a SATA power connector, then enable the port in BIOS; the step often missed is connecting both data and power cables securely.
No scheduled maintenance is required; the 16MB cache and fluid dynamic bearing motor are sealed, so replacement is only needed if the drive fails or capacity becomes insufficient.
The 1.5Gb/s SATA interface caps sustained transfer speed, so the interface bottleneck appears before the 7200 RPM platters or 16MB cache are saturated.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?