SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
Maxtor
A 250 GB 3.5" desktop hard drive with 7200 RPM, 16 MB cache and SATA 1.5 Gb/s interface
The Maxtor DiamondMax 10 6L250S0 is a 250GB 3.5-inch internal hard drive built for desktop computers. It connects through a SATA 1.5Gb/s interface and spins at 7200 RPM with a 16MB cache. The drive suits users who need affordable bulk storage for documents, media and backups.
A fluid dynamic bearing motor keeps acoustic output low during normal desktop use. Average seek time is 9ms and average latency is 4.17ms, so typical file access feels responsive. Native command queuing helps the controller order requests efficiently. The drive meets RoHS requirements and includes Shock Protection System and Data Protection System features.
Sustained read and write performance remains steady because the 7200 RPM spindle speed does not throttle under continuous load. The 16MB buffer absorbs bursts without forcing the platters to wait. Buyers who need higher capacities or faster interfaces should consider other models.
| Brand | Maxtor |
|---|---|
| Series | DiamondMax 10 |
| Model | 6L250S0 |
| Packaging | Bare Drive |
| Interface | SATA 1.5Gb/s |
| Capacity | 250GB |
| RPM | 7200 RPM |
| Cache | 16MB |
| Average Seek Time | 9ms |
| Average Latency | 4.17ms |
| Features | Native command queuing Fluid dynamic bearing motor for quiet operation RoHS compliant Improved reliability with: Shock Protection System Data Protection System |
| Form Factor | 3.5" |
| Тегло на пратката | 0.70 kg |
| Размери на опаковката | 203 × 152 × 51 mm |
Mount the drive in a 3.5" bay, attach a SATA data cable and a SATA power connector, then enable the port in BIOS; the step often missed is connecting both data and power cables securely.
No scheduled maintenance is required; the 16MB cache and fluid dynamic bearing motor are sealed, so replacement is only needed if the drive fails or capacity becomes insufficient.
The 1.5Gb/s SATA interface caps sustained transfer speed, so the interface bottleneck appears before the 7200 RPM platters or 16MB cache are saturated.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Няма съвпадащ език.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?