SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Maxtor
A 250 GB 3.5" desktop hard drive with 7200 RPM, 16 MB cache and SATA 1.5 Gb/s interface
The Maxtor DiamondMax 10 6L250S0 is a 250GB 3.5-inch internal hard drive built for desktop computers. It connects through a SATA 1.5Gb/s interface and spins at 7200 RPM with a 16MB cache. The drive suits users who need affordable bulk storage for documents, media and backups.
A fluid dynamic bearing motor keeps acoustic output low during normal desktop use. Average seek time is 9ms and average latency is 4.17ms, so typical file access feels responsive. Native command queuing helps the controller order requests efficiently. The drive meets RoHS requirements and includes Shock Protection System and Data Protection System features.
Sustained read and write performance remains steady because the 7200 RPM spindle speed does not throttle under continuous load. The 16MB buffer absorbs bursts without forcing the platters to wait. Buyers who need higher capacities or faster interfaces should consider other models.
| Brand | Maxtor |
|---|---|
| Series | DiamondMax 10 |
| Model | 6L250S0 |
| Packaging | Bare Drive |
| Interface | SATA 1.5Gb/s |
| Capacity | 250GB |
| RPM | 7200 RPM |
| Cache | 16MB |
| Average Seek Time | 9ms |
| Average Latency | 4.17ms |
| Features | Native command queuing Fluid dynamic bearing motor for quiet operation RoHS compliant Improved reliability with: Shock Protection System Data Protection System |
| Form Factor | 3.5" |
| Lähetyspaino | 0.70 kg |
| Pakkauksen mitat | 203 × 152 × 51 mm |
Mount the drive in a 3.5" bay, attach a SATA data cable and a SATA power connector, then enable the port in BIOS; the step often missed is connecting both data and power cables securely.
No scheduled maintenance is required; the 16MB cache and fluid dynamic bearing motor are sealed, so replacement is only needed if the drive fails or capacity becomes insufficient.
The 1.5Gb/s SATA interface caps sustained transfer speed, so the interface bottleneck appears before the 7200 RPM platters or 16MB cache are saturated.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?