SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Maxtor
A 250 GB 3.5" desktop hard drive with 7200 RPM, 16 MB cache and SATA 1.5 Gb/s interface
The Maxtor DiamondMax 10 6L250S0 is a 250GB 3.5-inch internal hard drive built for desktop computers. It connects through a SATA 1.5Gb/s interface and spins at 7200 RPM with a 16MB cache. The drive suits users who need affordable bulk storage for documents, media and backups.
A fluid dynamic bearing motor keeps acoustic output low during normal desktop use. Average seek time is 9ms and average latency is 4.17ms, so typical file access feels responsive. Native command queuing helps the controller order requests efficiently. The drive meets RoHS requirements and includes Shock Protection System and Data Protection System features.
Sustained read and write performance remains steady because the 7200 RPM spindle speed does not throttle under continuous load. The 16MB buffer absorbs bursts without forcing the platters to wait. Buyers who need higher capacities or faster interfaces should consider other models.
| Brand | Maxtor |
|---|---|
| Series | DiamondMax 10 |
| Model | 6L250S0 |
| Packaging | Bare Drive |
| Interface | SATA 1.5Gb/s |
| Capacity | 250GB |
| RPM | 7200 RPM |
| Cache | 16MB |
| Average Seek Time | 9ms |
| Average Latency | 4.17ms |
| Features | Native command queuing Fluid dynamic bearing motor for quiet operation RoHS compliant Improved reliability with: Shock Protection System Data Protection System |
| Form Factor | 3.5" |
| وزن الشحنة | 0.70 kg |
| أبعاد الطرد | 203 × 152 × 51 mm |
Mount the drive in a 3.5" bay, attach a SATA data cable and a SATA power connector, then enable the port in BIOS; the step often missed is connecting both data and power cables securely.
No scheduled maintenance is required; the 16MB cache and fluid dynamic bearing motor are sealed, so replacement is only needed if the drive fails or capacity becomes insufficient.
The 1.5Gb/s SATA interface caps sustained transfer speed, so the interface bottleneck appears before the 7200 RPM platters or 16MB cache are saturated.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟