SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
Maxtor
A 250 GB 3.5" desktop hard drive with 7200 RPM, 16 MB cache and SATA 1.5 Gb/s interface
The Maxtor DiamondMax 10 6L250S0 is a 250GB 3.5-inch internal hard drive built for desktop computers. It connects through a SATA 1.5Gb/s interface and spins at 7200 RPM with a 16MB cache. The drive suits users who need affordable bulk storage for documents, media and backups.
A fluid dynamic bearing motor keeps acoustic output low during normal desktop use. Average seek time is 9ms and average latency is 4.17ms, so typical file access feels responsive. Native command queuing helps the controller order requests efficiently. The drive meets RoHS requirements and includes Shock Protection System and Data Protection System features.
Sustained read and write performance remains steady because the 7200 RPM spindle speed does not throttle under continuous load. The 16MB buffer absorbs bursts without forcing the platters to wait. Buyers who need higher capacities or faster interfaces should consider other models.
| Brand | Maxtor |
|---|---|
| Series | DiamondMax 10 |
| Model | 6L250S0 |
| Packaging | Bare Drive |
| Interface | SATA 1.5Gb/s |
| Capacity | 250GB |
| RPM | 7200 RPM |
| Cache | 16MB |
| Average Seek Time | 9ms |
| Average Latency | 4.17ms |
| Features | Native command queuing Fluid dynamic bearing motor for quiet operation RoHS compliant Improved reliability with: Shock Protection System Data Protection System |
| Form Factor | 3.5" |
| Teža pošiljke | 0.70 kg |
| Velikost pošiljke | 203 × 152 × 51 mm |
Mount the drive in a 3.5" bay, attach a SATA data cable and a SATA power connector, then enable the port in BIOS; the step often missed is connecting both data and power cables securely.
No scheduled maintenance is required; the 16MB cache and fluid dynamic bearing motor are sealed, so replacement is only needed if the drive fails or capacity becomes insufficient.
The 1.5Gb/s SATA interface caps sustained transfer speed, so the interface bottleneck appears before the 7200 RPM platters or 16MB cache are saturated.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Ni ustreznega jezika.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?