Timetec 32GB Kit (2×16GB) DDR4 2400 CL17 1.2V SODIMM for 2017 iMac 18,1/18,2/18,3
- 32GB (2 x 16GB)
- 260-Pin DDR4 SO-DIMM
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Timetec
A 32 GB dual-channel DDR4 kit running at 3200 MHz with CL16 latency and a black aluminium heat spreader
Capacity 32GB (2 x 16GB)
This 32GB kit contains two 16GB DDR4 modules that run at 3200MHz with a tested latency of CL16-18-18-38. The black aluminum heat spreader helps manage thermals during extended sessions. It is built for desktop gaming and enthusiast systems that use DDR4 memory.
Each IC is individually screened to maintain stability at the rated 3200MHz speed and 1.35V voltage. The dual-rank 1Rx8 organisation supports consistent bandwidth under prolonged workloads. Enabling the XMP2.0 profile in the BIOS is required to reach the advertised frequency; otherwise the modules operate at the 2400MHz base speed.
The DDR4 288-pin unbuffered non-ECC standard used here tops out at the PC4-25600 data rate of 25,600MB/s. Higher frequencies or tighter timings would require a different memory generation. Compatibility depends on the motherboard's qualified vendor list for DDR4 3200MHz operation.
| Capacity | 32GB (2 x 16GB) |
|---|---|
| Speed | DDR4 3200 (PC4 25600) |
| Color | Black |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
The modules run at 1.35 V with a black aluminum heat spreader to dissipate heat, and they are rated for continuous operation at the advertised 3200 MHz CL16-18-18-38 timings once XMP 2.0 is enabled in the BIOS.
Your motherboard must support Intel XMP 2.0 (or the AMD equivalent) and you must enable the profile in the BIOS; without it the kit will run at the base 2400 MHz speed.
Yes, the kit uses standard 288-pin DDR4 unbuffered non-ECC modules at 1.35 V and is validated for both Intel and AMD DDR4 platforms, so it will install in any compatible DDR4 motherboard.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?