Timetec 32GB Kit (2×16GB) DDR4 2400 CL17 1.2V SODIMM for 2017 iMac 18,1/18,2/18,3
- 32GB (2 x 16GB)
- 260-Pin DDR4 SO-DIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
Timetec
A 32 GB dual-channel DDR4 kit running at 3200 MHz with CL16 latency and a black aluminium heat spreader
Capacity 32GB (2 x 16GB)
This 32GB kit contains two 16GB DDR4 modules that run at 3200MHz with a tested latency of CL16-18-18-38. The black aluminum heat spreader helps manage thermals during extended sessions. It is built for desktop gaming and enthusiast systems that use DDR4 memory.
Each IC is individually screened to maintain stability at the rated 3200MHz speed and 1.35V voltage. The dual-rank 1Rx8 organisation supports consistent bandwidth under prolonged workloads. Enabling the XMP2.0 profile in the BIOS is required to reach the advertised frequency; otherwise the modules operate at the 2400MHz base speed.
The DDR4 288-pin unbuffered non-ECC standard used here tops out at the PC4-25600 data rate of 25,600MB/s. Higher frequencies or tighter timings would require a different memory generation. Compatibility depends on the motherboard's qualified vendor list for DDR4 3200MHz operation.
| Capacity | 32GB (2 x 16GB) |
|---|---|
| Speed | DDR4 3200 (PC4 25600) |
| Color | Black |
Otras versiones de este modelo
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
The modules run at 1.35 V with a black aluminum heat spreader to dissipate heat, and they are rated for continuous operation at the advertised 3200 MHz CL16-18-18-38 timings once XMP 2.0 is enabled in the BIOS.
Your motherboard must support Intel XMP 2.0 (or the AMD equivalent) and you must enable the profile in the BIOS; without it the kit will run at the base 2400 MHz speed.
Yes, the kit uses standard 288-pin DDR4 unbuffered non-ECC modules at 1.35 V and is validated for both Intel and AMD DDR4 platforms, so it will install in any compatible DDR4 motherboard.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
Ningún idioma coincide.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?