Timetec 32GB Kit (2×16GB) DDR4 2400 CL17 1.2V SODIMM for 2017 iMac 18,1/18,2/18,3
- 32GB (2 x 16GB)
- 260-Pin DDR4 SO-DIMM
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
Timetec
A 32 GB dual-channel DDR4 kit running at 3200 MHz with CL16 latency and a black aluminium heat spreader
Capacity 32GB (2 x 16GB)
This 32GB kit contains two 16GB DDR4 modules that run at 3200MHz with a tested latency of CL16-18-18-38. The black aluminum heat spreader helps manage thermals during extended sessions. It is built for desktop gaming and enthusiast systems that use DDR4 memory.
Each IC is individually screened to maintain stability at the rated 3200MHz speed and 1.35V voltage. The dual-rank 1Rx8 organisation supports consistent bandwidth under prolonged workloads. Enabling the XMP2.0 profile in the BIOS is required to reach the advertised frequency; otherwise the modules operate at the 2400MHz base speed.
The DDR4 288-pin unbuffered non-ECC standard used here tops out at the PC4-25600 data rate of 25,600MB/s. Higher frequencies or tighter timings would require a different memory generation. Compatibility depends on the motherboard's qualified vendor list for DDR4 3200MHz operation.
| Capacity | 32GB (2 x 16GB) |
|---|---|
| Speed | DDR4 3200 (PC4 25600) |
| Color | Black |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
The modules run at 1.35 V with a black aluminum heat spreader to dissipate heat, and they are rated for continuous operation at the advertised 3200 MHz CL16-18-18-38 timings once XMP 2.0 is enabled in the BIOS.
Your motherboard must support Intel XMP 2.0 (or the AMD equivalent) and you must enable the profile in the BIOS; without it the kit will run at the base 2400 MHz speed.
Yes, the kit uses standard 288-pin DDR4 unbuffered non-ECC modules at 1.35 V and is validated for both Intel and AMD DDR4 platforms, so it will install in any compatible DDR4 motherboard.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม