Timetec 32GB Kit (2×16GB) DDR4 2400 CL17 1.2V SODIMM for 2017 iMac 18,1/18,2/18,3
- 32GB (2 x 16GB)
- 260-Pin DDR4 SO-DIMM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Timetec
A 32 GB dual-channel DDR4 kit running at 3200 MHz with CL16 latency and a black aluminium heat spreader
Capacity 32GB (2 x 16GB)
This 32GB kit contains two 16GB DDR4 modules that run at 3200MHz with a tested latency of CL16-18-18-38. The black aluminum heat spreader helps manage thermals during extended sessions. It is built for desktop gaming and enthusiast systems that use DDR4 memory.
Each IC is individually screened to maintain stability at the rated 3200MHz speed and 1.35V voltage. The dual-rank 1Rx8 organisation supports consistent bandwidth under prolonged workloads. Enabling the XMP2.0 profile in the BIOS is required to reach the advertised frequency; otherwise the modules operate at the 2400MHz base speed.
The DDR4 288-pin unbuffered non-ECC standard used here tops out at the PC4-25600 data rate of 25,600MB/s. Higher frequencies or tighter timings would require a different memory generation. Compatibility depends on the motherboard's qualified vendor list for DDR4 3200MHz operation.
| Capacity | 32GB (2 x 16GB) |
|---|---|
| Speed | DDR4 3200 (PC4 25600) |
| Color | Black |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The modules run at 1.35 V with a black aluminum heat spreader to dissipate heat, and they are rated for continuous operation at the advertised 3200 MHz CL16-18-18-38 timings once XMP 2.0 is enabled in the BIOS.
Your motherboard must support Intel XMP 2.0 (or the AMD equivalent) and you must enable the profile in the BIOS; without it the kit will run at the base 2400 MHz speed.
Yes, the kit uses standard 288-pin DDR4 unbuffered non-ECC modules at 1.35 V and is validated for both Intel and AMD DDR4 platforms, so it will install in any compatible DDR4 motherboard.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟