NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
A-Tech
16GB DDR4 2400MHz ECC registered server memory module with CL17 latency and 1.2V operation
This 16GB DDR4 2400MHz ECC registered DIMM targets administrators upgrading compatible server or workstation platforms. The module uses a 2Rx8 organisation and operates at the standard 1.2V DDR4 voltage. It serves as a direct replacement for the Kingston KTD-PE424D8/16G part number.
ECC circuitry corrects single-bit errors on the fly, preventing data corruption during long compute jobs or virtualization sessions. Registered buffering reduces electrical load on the memory controller, helping signal integrity when multiple modules populate a channel. The CL17 latency and PC4-19200 rating deliver consistent throughput under continuous multi-threaded demand.
The 288-pin DIMM keying matches standard DDR4 server slots; the 262-pin reference in some documents is a typo and does not affect fitment. Verify that your platform supports registered ECC memory and the 2400MHz speed before purchase, as consumer desktop boards typically reject registered modules. Mixing ranks or voltages can prevent the system from posting.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Kingston |
| Model | KTD-PE424D8/16G |
| Capacity | 16GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | KTD-PE424D8/16G |
The module operates at the standard DDR4 voltage of 1.20V, which keeps power draw and heat output low during sustained workloads; its registered design adds a small buffering overhead but does not significantly raise thermal load compared to unbuffered DIMMs.
The system must provide a DDR4 RDIMM slot with a 288-pin interface and a memory controller that supports ECC and registered modules at 2400MHz; without both ECC and registered support the stick will not function.
Mixing is possible when all modules are DDR4 ECC RDIMMs; the memory controller will run every stick at the lowest common speed and the loosest timings present, so the CL17 timing on this module will be respected if the existing RAM is equal or slower.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?