NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
A-Tech
16GB DDR4 2400MHz ECC registered server memory module with CL17 latency and 1.2V operation
This 16GB DDR4 2400MHz ECC registered DIMM targets administrators upgrading compatible server or workstation platforms. The module uses a 2Rx8 organisation and operates at the standard 1.2V DDR4 voltage. It serves as a direct replacement for the Kingston KTD-PE424D8/16G part number.
ECC circuitry corrects single-bit errors on the fly, preventing data corruption during long compute jobs or virtualization sessions. Registered buffering reduces electrical load on the memory controller, helping signal integrity when multiple modules populate a channel. The CL17 latency and PC4-19200 rating deliver consistent throughput under continuous multi-threaded demand.
The 288-pin DIMM keying matches standard DDR4 server slots; the 262-pin reference in some documents is a typo and does not affect fitment. Verify that your platform supports registered ECC memory and the 2400MHz speed before purchase, as consumer desktop boards typically reject registered modules. Mixing ranks or voltages can prevent the system from posting.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Kingston |
| Model | KTD-PE424D8/16G |
| Capacity | 16GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | KTD-PE424D8/16G |
The module operates at the standard DDR4 voltage of 1.20V, which keeps power draw and heat output low during sustained workloads; its registered design adds a small buffering overhead but does not significantly raise thermal load compared to unbuffered DIMMs.
The system must provide a DDR4 RDIMM slot with a 288-pin interface and a memory controller that supports ECC and registered modules at 2400MHz; without both ECC and registered support the stick will not function.
Mixing is possible when all modules are DDR4 ECC RDIMMs; the memory controller will run every stick at the lowest common speed and the loosest timings present, so the CL17 timing on this module will be respected if the existing RAM is equal or slower.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?