EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
A-Tech
16 GB DDR5 laptop module running at 5600 MHz with CL40 latency and 1.1 V operation
This 16GB DDR5 5600 SODIMM module is built for laptop owners who need a direct memory replacement. The 262-pin unbuffered design operates at 1.10V with a CAS latency of 40. It uses major-brand DRAM ICs and is tested for reliable performance in notebook and all-in-one systems.
This module serves as a compatible replacement for the Klevv KD5AGSA80-56G460A part. The upgrade is worth it when your current memory capacity limits multitasking or when an existing stick has failed. The 5600 MHz speed matches the original specification so the system runs at its rated data rate.
Before ordering verify that your laptop accepts DDR5 SO-DIMM memory and supports 1.1V operation. Consult the system manual for the correct slot population rules and maximum supported capacity per slot. This module is non-ECC and unbuffered so it will not work in platforms that require registered or error-correcting memory.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Klevv KD5AGSA80-56G460A |
| Model | A-Tech 16GB DDR5-5600 Laptop RAM Module |
| Capacity | 16GB |
| Type | 262-Pin DDR5 SO-DIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | 40 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | Major Brand DRAM IC Chips |
| Recommend Use | Compatible Replacement for Klevv KD5AGSA80-56G460A |
This module uses the standard 262-pin DDR5 SO-DIMM form factor. It fits any laptop slot designed for DDR5 SO-DIMM memory. Check your system manual to confirm DDR5 support before purchase.
Power off the laptop and disconnect the battery if possible. Align the notch on the 262-pin module with the slot key, insert at a slight angle, then press down firmly until the side clips click. The step often missed is pressing evenly on both ends until both clips engage fully.
No firmware updates are needed for the memory itself. The module runs at the standard 1.10V DDR5 voltage. If you experience instability, a BIOS update from your laptop manufacturer may improve compatibility, but the RAM requires no ongoing maintenance.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?