NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A-Tech
16 GB DDR5 laptop module running at 5600 MHz with CL40 latency and 1.1 V operation
This 16GB DDR5 5600 SODIMM module is built for laptop owners who need a direct memory replacement. The 262-pin unbuffered design operates at 1.10V with a CAS latency of 40. It uses major-brand DRAM ICs and is tested for reliable performance in notebook and all-in-one systems.
This module serves as a compatible replacement for the Klevv KD5AGSA80-56G460A part. The upgrade is worth it when your current memory capacity limits multitasking or when an existing stick has failed. The 5600 MHz speed matches the original specification so the system runs at its rated data rate.
Before ordering verify that your laptop accepts DDR5 SO-DIMM memory and supports 1.1V operation. Consult the system manual for the correct slot population rules and maximum supported capacity per slot. This module is non-ECC and unbuffered so it will not work in platforms that require registered or error-correcting memory.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Klevv KD5AGSA80-56G460A |
| Model | A-Tech 16GB DDR5-5600 Laptop RAM Module |
| Capacity | 16GB |
| Type | 262-Pin DDR5 SO-DIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | 40 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | Major Brand DRAM IC Chips |
| Recommend Use | Compatible Replacement for Klevv KD5AGSA80-56G460A |
This module uses the standard 262-pin DDR5 SO-DIMM form factor. It fits any laptop slot designed for DDR5 SO-DIMM memory. Check your system manual to confirm DDR5 support before purchase.
Power off the laptop and disconnect the battery if possible. Align the notch on the 262-pin module with the slot key, insert at a slight angle, then press down firmly until the side clips click. The step often missed is pressing evenly on both ends until both clips engage fully.
No firmware updates are needed for the memory itself. The module runs at the standard 1.10V DDR5 voltage. If you experience instability, a BIOS update from your laptop manufacturer may improve compatibility, but the RAM requires no ongoing maintenance.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?