NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
16 GB DDR5 laptop module running at 5600 MHz with CL40 latency and 1.1 V operation
This 16GB DDR5 5600 SODIMM module is built for laptop owners who need a direct memory replacement. The 262-pin unbuffered design operates at 1.10V with a CAS latency of 40. It uses major-brand DRAM ICs and is tested for reliable performance in notebook and all-in-one systems.
This module serves as a compatible replacement for the Klevv KD5AGSA80-56G460A part. The upgrade is worth it when your current memory capacity limits multitasking or when an existing stick has failed. The 5600 MHz speed matches the original specification so the system runs at its rated data rate.
Before ordering verify that your laptop accepts DDR5 SO-DIMM memory and supports 1.1V operation. Consult the system manual for the correct slot population rules and maximum supported capacity per slot. This module is non-ECC and unbuffered so it will not work in platforms that require registered or error-correcting memory.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Klevv KD5AGSA80-56G460A |
| Model | A-Tech 16GB DDR5-5600 Laptop RAM Module |
| Capacity | 16GB |
| Type | 262-Pin DDR5 SO-DIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | 40 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | Major Brand DRAM IC Chips |
| Recommend Use | Compatible Replacement for Klevv KD5AGSA80-56G460A |
This module uses the standard 262-pin DDR5 SO-DIMM form factor. It fits any laptop slot designed for DDR5 SO-DIMM memory. Check your system manual to confirm DDR5 support before purchase.
Power off the laptop and disconnect the battery if possible. Align the notch on the 262-pin module with the slot key, insert at a slight angle, then press down firmly until the side clips click. The step often missed is pressing evenly on both ends until both clips engage fully.
No firmware updates are needed for the memory itself. The module runs at the standard 1.10V DDR5 voltage. If you experience instability, a BIOS update from your laptop manufacturer may improve compatibility, but the RAM requires no ongoing maintenance.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?