NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
A-Tech
16 GB DDR5 laptop module running at 5600 MHz with CL40 latency and 1.1 V operation
This 16GB DDR5 5600 SODIMM module is built for laptop owners who need a direct memory replacement. The 262-pin unbuffered design operates at 1.10V with a CAS latency of 40. It uses major-brand DRAM ICs and is tested for reliable performance in notebook and all-in-one systems.
This module serves as a compatible replacement for the Klevv KD5AGSA80-56G460A part. The upgrade is worth it when your current memory capacity limits multitasking or when an existing stick has failed. The 5600 MHz speed matches the original specification so the system runs at its rated data rate.
Before ordering verify that your laptop accepts DDR5 SO-DIMM memory and supports 1.1V operation. Consult the system manual for the correct slot population rules and maximum supported capacity per slot. This module is non-ECC and unbuffered so it will not work in platforms that require registered or error-correcting memory.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Klevv KD5AGSA80-56G460A |
| Model | A-Tech 16GB DDR5-5600 Laptop RAM Module |
| Capacity | 16GB |
| Type | 262-Pin DDR5 SO-DIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | 40 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | Major Brand DRAM IC Chips |
| Recommend Use | Compatible Replacement for Klevv KD5AGSA80-56G460A |
This module uses the standard 262-pin DDR5 SO-DIMM form factor. It fits any laptop slot designed for DDR5 SO-DIMM memory. Check your system manual to confirm DDR5 support before purchase.
Power off the laptop and disconnect the battery if possible. Align the notch on the 262-pin module with the slot key, insert at a slight angle, then press down firmly until the side clips click. The step often missed is pressing evenly on both ends until both clips engage fully.
No firmware updates are needed for the memory itself. The module runs at the standard 1.10V DDR5 voltage. If you experience instability, a BIOS update from your laptop manufacturer may improve compatibility, but the RAM requires no ongoing maintenance.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?