NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
A-Tech
32 GB DDR4 2400 ECC load-reduced DIMM with 4Rx4 organisation and CL17 latency for server and workstation upgrades
This 32GB DDR4 2400 module is built for servers and workstations that require ECC protection and load-reduced signalling. It carries a 4Rx4 organisation and runs at the standard 1.20V DDR4 voltage. The single DIMM suits administrators expanding memory capacity in compatible 288-pin platforms.
The module plugs into a standard DDR4 288-pin socket but demands a platform that accepts load-reduced DIMMs and 4Rx4 ranking. It frees the memory controller from the electrical load of conventional quad-rank registered DIMMs, allowing higher total capacity per channel. Systems limited to standard RDIMMs or lower rank counts cannot use this module.
Operating at DDR4 2400 (PC4-19200) with CAS latency 17, the DIMM delivers steady bandwidth under continuous server workloads such as virtualisation, database caching or large-file processing. ECC corrects single-bit errors on the fly, preventing data corruption during long uptime periods. The 1.20V operation keeps power draw predictable in densely populated chassis.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module runs at CL17 and 1.20V, which are standard DDR4 timings; sustained throughput is limited by the 2400MHz bus rather than the CAS latency or voltage.
Operating at 1.2V DDR4 standard voltage, the LRDIMM design reduces electrical load on the memory bus, keeping power draw and thermal output lower than a comparable quad-rank RDIMM.
The system must provide a 288-pin DDR4 slot with ECC support and a chipset or CPU memory controller qualified for Load Reduced DIMMs.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?