NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
32 GB DDR4 2400 ECC load-reduced DIMM with 4Rx4 organisation and CL17 latency for server and workstation upgrades
This 32GB DDR4 2400 module is built for servers and workstations that require ECC protection and load-reduced signalling. It carries a 4Rx4 organisation and runs at the standard 1.20V DDR4 voltage. The single DIMM suits administrators expanding memory capacity in compatible 288-pin platforms.
The module plugs into a standard DDR4 288-pin socket but demands a platform that accepts load-reduced DIMMs and 4Rx4 ranking. It frees the memory controller from the electrical load of conventional quad-rank registered DIMMs, allowing higher total capacity per channel. Systems limited to standard RDIMMs or lower rank counts cannot use this module.
Operating at DDR4 2400 (PC4-19200) with CAS latency 17, the DIMM delivers steady bandwidth under continuous server workloads such as virtualisation, database caching or large-file processing. ECC corrects single-bit errors on the fly, preventing data corruption during long uptime periods. The 1.20V operation keeps power draw predictable in densely populated chassis.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module runs at CL17 and 1.20V, which are standard DDR4 timings; sustained throughput is limited by the 2400MHz bus rather than the CAS latency or voltage.
Operating at 1.2V DDR4 standard voltage, the LRDIMM design reduces electrical load on the memory bus, keeping power draw and thermal output lower than a comparable quad-rank RDIMM.
The system must provide a 288-pin DDR4 slot with ECC support and a chipset or CPU memory controller qualified for Load Reduced DIMMs.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟