NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
A-Tech
32 GB DDR4 2400 ECC registered server memory with CL17 latency and 1.20 V operation
This 32 GB DDR4 registered DIMM is built for servers and workstations that require error-correcting memory. The module uses a 2Rx4 organisation and runs at the standard 1.20 V.
Registered DIMMs add a register between the memory controller and the DRAM chips, which reduces electrical load and allows higher capacities per channel. The trade-off is one extra clock cycle of latency compared with unbuffered modules. This stick operates at DDR4 2400 with a CL17 timing and will only function in platforms that support registered ECC memory.
Verify that your motherboard or system accepts 288-pin DDR4 RDIMMs with ECC and a 2Rx4 rank configuration. Confirm the maximum supported speed per slot and the total memory capacity allowed by the CPU and chipset. Ensure the BIOS is current enough to recognise 32 GB registered modules.
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
This listing is a single 32GB DDR4 2400 (PC4-19200) ECC RDIMM with 2Rx4 organisation, CL17 latency and 1.20V operation; select it when your server or workstation requires exactly one registered 288-pin module of that specification.
The module transfers data at 2400 MT/s with CL17 timing, delivering registered ECC error correction at the standard DDR4 1.20V level for stable operation in compatible server and workstation platforms.
The 288-pin registered DIMM interface limits use to systems that accept DDR4 ECC RDIMMs; it will not fit UDIMM, SO-DIMM or non-DDR4 slots, and the platform must support registered signalling and ECC functionality.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?