Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green DDR2 laptop memory modules with gold contacts

A-Tech

A-Tech 4GB (2x2GB) DDR2 533MHz CL4 1.8V 200-Pin SO-DIMM laptop RAM

SKU CH-GV8P-ZGEZC

Dual-channel 4 GB kit of DDR2 533 MHz SO-DIMM modules for compatible laptops and all-in-one computers

  • Capacity4GB (2 x 2GB)
  • Type200-Pin DDR2 SO-DIMM
  • SpeedDDR2 533 (PC2 4200)
  • CAS LatencyCL4
  • Voltage1.80V
  • ECCNo

Capacity 4GB (2 x 2GB)

Speed DDR2 533 (PC2 4200)

CAS Latency CL4

  • 4GB dual-channel kit expands capacity for smoother multitasking
  • DDR2 533MHz CL4 timing accelerates data access
  • 8V standard voltage ensures broad laptop compatibility
  • 200-pin SO-DIMM form factor fits DDR2 notebook slots
  • Rigorously tested modules deliver dependable system stability

DDR2 SO-DIMM upgrade kit

This 4 GB kit contains two 2 GB DDR2 SO-DIMM modules that run at 533 MHz with a CAS latency of CL4. It is built for laptops, notebooks and all-in-one computers that accept 200-pin DDR2 memory and need a straightforward capacity increase.

Dual-channel kit for DDR2 platforms

The matched pair enables dual-channel operation on systems with two available SO-DIMM slots, freeing a single slot if the board has three or leaving both slots filled on two-slot designs. Each module operates at the standard 1.8 V DDR2 voltage and is non-ECC unbuffered, so it fits the electrical requirements of mainstream DDR2 mobile platforms without registration or error-correction overhead.

Standard DDR2 power and thermals

At 1.8 V the modules draw the normal power envelope for DDR2 SO-DIMM parts, producing modest heat that is handled by the laptop's existing thermal solution. No additional cooling or higher-wattage power supply is required beyond what the original system provides for its memory subsystem.

Helstu kostir

  • 4GB dual-channel kit expands capacity for smoother multitasking
  • DDR2 533MHz CL4 timing accelerates data access
  • 8V standard voltage ensures broad laptop compatibility
  • 200-pin SO-DIMM form factor fits DDR2 notebook slots
  • Rigorously tested modules deliver dependable system stability

Tæknilýsing

BrandA-Tech
SeriesA-Tech DDR2 Laptop Memory RAM
Capacity4GB (2 x 2GB)
Type200-Pin DDR2 SO-DIMM
SpeedDDR2 533 (PC2 4200)
CAS LatencyCL4
Voltage1.80V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Recommend UseAMD & Intel Compatible

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will the 533 MHz DDR2 speed become the bottleneck during long rendering sessions?

The kit runs at DDR2 533 (PC2-4200) with CL4 latency; sustained bandwidth is capped at that rate, so heavy workloads will hit the memory throughput ceiling first.

How much heat does the 1.8 V unbuffered SO-DIMM produce when the laptop runs all day?

Standard 1.8 V DDR2 SO-DIMMs generate modest heat; the modules are unbuffered and non-ECC, so thermal output stays low enough for typical laptop cooling.

Does my notebook need a 200-pin DDR2 slot and dual-channel support to use both 2 GB sticks?

Yes — the kit requires two 200-pin DDR2 SO-DIMM sockets and a chipset that can run dual-channel at 533 MHz.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.