A-Tech 2GB DDR2 667MHz SODIMM PC2-5300 CL5 1.8V 200-Pin laptop RAM
- 2GB
- 200-Pin DDR2 SO-DIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
A-Tech
Dual-channel 4 GB kit of DDR2 533 MHz SO-DIMM modules for compatible laptops and all-in-one computers
Capacity 4GB (2 x 2GB)
Speed DDR2 533 (PC2 4200)
This 4 GB kit contains two 2 GB DDR2 SO-DIMM modules that run at 533 MHz with a CAS latency of CL4. It is built for laptops, notebooks and all-in-one computers that accept 200-pin DDR2 memory and need a straightforward capacity increase.
The matched pair enables dual-channel operation on systems with two available SO-DIMM slots, freeing a single slot if the board has three or leaving both slots filled on two-slot designs. Each module operates at the standard 1.8 V DDR2 voltage and is non-ECC unbuffered, so it fits the electrical requirements of mainstream DDR2 mobile platforms without registration or error-correction overhead.
At 1.8 V the modules draw the normal power envelope for DDR2 SO-DIMM parts, producing modest heat that is handled by the laptop's existing thermal solution. No additional cooling or higher-wattage power supply is required beyond what the original system provides for its memory subsystem.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR2 Laptop Memory RAM |
| Capacity | 4GB (2 x 2GB) |
| Type | 200-Pin DDR2 SO-DIMM |
| Speed | DDR2 533 (PC2 4200) |
| CAS Latency | CL4 |
| Voltage | 1.80V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Recommend Use | AMD & Intel Compatible |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
The kit runs at DDR2 533 (PC2-4200) with CL4 latency; sustained bandwidth is capped at that rate, so heavy workloads will hit the memory throughput ceiling first.
Standard 1.8 V DDR2 SO-DIMMs generate modest heat; the modules are unbuffered and non-ECC, so thermal output stays low enough for typical laptop cooling.
Yes — the kit requires two 200-pin DDR2 SO-DIMM sockets and a chipset that can run dual-channel at 533 MHz.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Nessuna lingua corrisponde.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?