เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน

สินค้าที่ติดตาม เข้าสู่ระบบ

A-Tech

A-Tech 4GB (2x2GB) DDR2 533MHz CL4 1.8V 200-Pin SO-DIMM laptop RAM

SKU CH-GV8P-ZGEZC

Dual-channel 4 GB kit of DDR2 533 MHz SO-DIMM modules for compatible laptops and all-in-one computers

  • Capacity4GB (2 x 2GB)
  • Type200-Pin DDR2 SO-DIMM
  • SpeedDDR2 533 (PC2 4200)
  • CAS LatencyCL4
  • Voltage1.80V
  • ECCNo

Capacity 4GB (2 x 2GB)

Speed DDR2 533 (PC2 4200)

CAS Latency CL4

  • 4GB dual-channel kit expands capacity for smoother multitasking
  • DDR2 533MHz CL4 timing accelerates data access
  • 8V standard voltage ensures broad laptop compatibility
  • 200-pin SO-DIMM form factor fits DDR2 notebook slots
  • Rigorously tested modules deliver dependable system stability

DDR2 SO-DIMM upgrade kit

This 4 GB kit contains two 2 GB DDR2 SO-DIMM modules that run at 533 MHz with a CAS latency of CL4. It is built for laptops, notebooks and all-in-one computers that accept 200-pin DDR2 memory and need a straightforward capacity increase.

Dual-channel kit for DDR2 platforms

The matched pair enables dual-channel operation on systems with two available SO-DIMM slots, freeing a single slot if the board has three or leaving both slots filled on two-slot designs. Each module operates at the standard 1.8 V DDR2 voltage and is non-ECC unbuffered, so it fits the electrical requirements of mainstream DDR2 mobile platforms without registration or error-correction overhead.

Standard DDR2 power and thermals

At 1.8 V the modules draw the normal power envelope for DDR2 SO-DIMM parts, producing modest heat that is handled by the laptop's existing thermal solution. No additional cooling or higher-wattage power supply is required beyond what the original system provides for its memory subsystem.

จุดเด่น

  • 4GB dual-channel kit expands capacity for smoother multitasking
  • DDR2 533MHz CL4 timing accelerates data access
  • 8V standard voltage ensures broad laptop compatibility
  • 200-pin SO-DIMM form factor fits DDR2 notebook slots
  • Rigorously tested modules deliver dependable system stability

ข้อมูลจำเพาะ

BrandA-Tech
SeriesA-Tech DDR2 Laptop Memory RAM
Capacity4GB (2 x 2GB)
Type200-Pin DDR2 SO-DIMM
SpeedDDR2 533 (PC2 4200)
CAS LatencyCL4
Voltage1.80V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Recommend UseAMD & Intel Compatible

รุ่นอื่นในตระกูลเดียวกัน

อีก 5 รุ่นในตระกูลเดียวกัน

ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ

คำถามเกี่ยวกับสินค้านี้

Will the 533 MHz DDR2 speed become the bottleneck during long rendering sessions?

The kit runs at DDR2 533 (PC2-4200) with CL4 latency; sustained bandwidth is capped at that rate, so heavy workloads will hit the memory throughput ceiling first.

How much heat does the 1.8 V unbuffered SO-DIMM produce when the laptop runs all day?

Standard 1.8 V DDR2 SO-DIMMs generate modest heat; the modules are unbuffered and non-ECC, so thermal output stays low enough for typical laptop cooling.

Does my notebook need a 200-pin DDR2 slot and dual-channel support to use both 2 GB sticks?

Yes — the kit requires two 200-pin DDR2 SO-DIMM sockets and a chipset that can run dual-channel at 533 MHz.

อื่น ๆ ในหมวดนี้

ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้

หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที