NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
A-Tech
8GB DDR4 2400 CL17 unbuffered DIMM desktop memory module with 1.20V operation
This A-Tech module provides an 8GB DDR4 2400 upgrade for desktop computers. It uses a standard 288-pin DIMM form factor and operates at 1.20V. The memory is designed as a compatible replacement for the G.Skill F4-2400C15D-16GFX kit.
This unbuffered, non-ECC UDIMM suits standard desktop motherboards that accept DDR4 2400 speeds. Systems requiring ECC error correction or registered buffering must select a different module type. Buyers should verify their board supports this specific speed and latency combination.
The module runs at a tested frequency of 2400 with a CAS latency of CL17. This timing value determines whether the stick matches the performance profile required by the target system. Compatibility depends on the motherboard accepting this specific latency at the rated voltage.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for G.Skill |
| Model | F4-2400C15D-16GFX |
| Capacity | 8GB |
| Speed | DDR4 2400 (PC4 19200) |
| Tested Frequency | 2400 |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | F4-2400C15D-16GFX |
| Recommend Use | Compatible Replacement for G.Skill F4-2400C15D-16GFX |
CL17 is the rated CAS latency at 2400 MHz; the module runs at standard 1.20 V DDR4 voltage without a heat spreader, so latency stays consistent under normal desktop workloads.
The unbuffered DIMM has no heat spreader and operates at 1.20 V, so it generates minimal heat and no audible noise even during continuous use.
A standard desktop DDR4 DIMM slot (288-pin) is needed; the module is non-ECC unbuffered and runs at 1.2 V, matching the DDR4 desktop specification.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?