Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Chrome 90-degree compression elbow fitting with knurled collars for 16mm hard tube

Alphacool

Alphacool HT 16mm HardTube Compression Fitting 90° Elbow Chrome 17297

SKU CH-KZ1B-XGSJS

Connects 16 mm hard tubes at a 90° angle with a chrome compression finish

  • TypeFittings

Color Chrome

  • 90° elbow routes hard tubing cleanly around tight bends
  • Compression design seals 16 mm acrylic, brass, borosilicate or carbon tubes securely
  • Knurled collars allow firm hand-tightening without extra tools
  • Chrome finish resists fading and peeling for long-lasting appearance
  • Alphacool branding on body and collars adds a professional aesthetic

16 mm Hard-Tube 90° Elbow

This chrome compression fitting joins 16 mm acrylic, brass, borosilicate or carbon tubes at a right angle. It suits custom-loop builders who need a secure, leak-tested connection in tight routing spaces. The knurled collars allow tool-free tightening during assembly. Part number 17297 identifies the exact component for repeat orders.

Sustained-loop reliability

The new application process prevents the chrome finish from fading or peeling after months of continuous coolant flow and thermal cycling. Alphacool branding on the body and collars remains legible, preserving a professional aesthetic throughout the loop's service life. No degradation of the sealing surfaces is introduced by the coating method.

16 mm tube compatibility only

This fitting accepts 16 mm outer-diameter hard tubes and cannot be used with smaller or larger diameters or with soft tubing. Builders planning mixed-size runs must source matching fittings for each tube size separately.

Helstu kostir

  • 90° elbow routes hard tubing cleanly around tight bends
  • Compression design seals 16 mm acrylic, brass, borosilicate or carbon tubes securely
  • Knurled collars allow firm hand-tightening without extra tools
  • Chrome finish resists fading and peeling for long-lasting appearance
  • Alphacool branding on body and collars adds a professional aesthetic

Tæknilýsing

TypeFittings

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Does the 90° elbow fitting add noticeable flow resistance or heat in a loop running continuously?

The fitting is a passive component with no moving parts and does not generate heat; any flow restriction from the 90° bend is minimal in a properly designed custom loop.

What tube size and material must I already have for this 16 mm compression fitting to work?

You need 16 mm outer-diameter hard tubing made of acrylic, brass, borosilicate glass or carbon; the knurled compression collars seal directly on that tube size.

Will the chrome finish on this 17297 fitting match older Alphacool fittings already in my build?

Alphacool uses a consistent chrome application process across the HT series so the finish should coordinate with existing Alphacool chrome components.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.