NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
ASRock
Intel LGA1200 ATX motherboard with Z590 chipset, four DDR4 slots up to 128GB, 4800MHz OC support, USB-C, HDMI, Gigabit LAN and 7.1 audio
The ASRock Z590-C/ac is an ATX motherboard built on the Intel Z590 chipset with an LGA 1200 socket. It supports 10th and 11th generation Intel Core processors and accommodates up to 128 GB of DDR4 memory across four slots running at speeds up to 4800 MHz when overclocked. The board includes Intel I219V Gigabit LAN and Realtek ALC897 7.1 channel audio with Nahimic enhancement.
This board fits enthusiasts who want a Thunderbolt add-in card header and RAID 0, 1, 5, 10 support over six SATA 6 Gb/s ports. It also provides dual RGB and addressable LED headers plus dedicated CPU and water-pump fan connectors with smart speed control. Builders requiring integrated Wi-Fi or Bluetooth, multiple M.2 slots, or a smaller micro-ATX form factor should look at other models.
The memory subsystem tops out at 128 GB across four DDR4 slots with a maximum overclocked speed of 4800 MHz. This ceiling determines whether the board matches your planned memory kit and performance target. If your workload demands higher memory frequencies or greater total capacity, a different platform will be necessary.
Engin birt tæknilýsing fyrir þessa vöru enn.
The board uses the ATX form factor with a 24-pin ATX power connector, an 8-pin 12 V connector and an additional 4-pin 12 V connector, all in standard positions for ATX cases.
Both 12 V connectors are Hi-Density power connectors; the 8-pin is required and the 4-pin supplies additional current for heavy CPU loads, so connect both for full stability.
Fit a compatible SPI TPM 2.0 module onto the dedicated header to enable firmware TPM support required by Windows 11.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?