Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green PCI fibre channel card with metal bracket and gold edge connector

Emulex

Emulex LP9002L-F2 2Gb Single Channel 64Bit 66Mhz PCI Fibre Channel HBA Standard Bracket

SKU CH-6ESF-SE90E

Adds a single 2 Gb Fibre Channel link to servers using a 64-bit 66 MHz PCI slot with a standard bracket

  • Single-channel 2 Gb Fibre Channel connectivity via 64-bit 66 MHz PCI bus
  • Standard bracket fits typical server chassis slots
  • Lightweight 5.1 oz design reduces chassis load
  • Compact 6.6" length allows dense slot population

Emulex LP9002L-F2 Fibre Channel HBA

This Emulex Lightpulse host bus adapter provides a single 2Gb Fibre Channel connection over a 64Bit 66Mhz PCI bus. It is intended for servers that need to attach to a storage-area network using legacy PCI slots. The card ships with a standard bracket and no additional accessories.

PCI slot installation and compatibility notes

The adapter fits a standard 64Bit 66Mhz PCI slot and uses the supplied bracket for secure mounting. Physical dimensions are 6.6" length, 2.6" width and 1" height with a weight of 5.1 units. Buyers who need a low-profile bracket or a multi-channel card should verify requirements before ordering.

Helstu kostir

  • Single-channel 2 Gb Fibre Channel connectivity via 64-bit 66 MHz PCI bus
  • Standard bracket fits typical server chassis slots
  • Lightweight 5.1 oz design reduces chassis load
  • Compact 6.6" length allows dense slot population

Tæknilýsing

BrandEMULEX

Spurningar um þessa vöru

How can I confirm the Emulex LP9002L-F2 HBA is operating correctly after installation?

Check the server BIOS or operating system device manager to verify the 2Gb single-channel Fibre Channel adapter is detected at 64-bit 66MHz on the PCI bus and that the link light shows an active connection to the fabric.

What does the Emulex LP9002L-F2 package contain and what must I source separately?

The box includes the LP9002L-F2 host bus adapter with a standard bracket installed; you will need to provide a compatible PCI slot, a fibre-optic cable with the correct connector type, and any required driver software for your operating system.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.