Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

Emulex

Emulex LP9002L-F2 2Gb Single Channel 64Bit 66Mhz PCI Fibre Channel HBA Standard Bracket

SKU CH-6ESF-SE90E

Adds a single 2 Gb Fibre Channel link to servers using a 64-bit 66 MHz PCI slot with a standard bracket

  • Single-channel 2 Gb Fibre Channel connectivity via 64-bit 66 MHz PCI bus
  • Standard bracket fits typical server chassis slots
  • Lightweight 5.1 oz design reduces chassis load
  • Compact 6.6" length allows dense slot population

Emulex LP9002L-F2 Fibre Channel HBA

This Emulex Lightpulse host bus adapter provides a single 2Gb Fibre Channel connection over a 64Bit 66Mhz PCI bus. It is intended for servers that need to attach to a storage-area network using legacy PCI slots. The card ships with a standard bracket and no additional accessories.

PCI slot installation and compatibility notes

The adapter fits a standard 64Bit 66Mhz PCI slot and uses the supplied bracket for secure mounting. Physical dimensions are 6.6" length, 2.6" width and 1" height with a weight of 5.1 units. Buyers who need a low-profile bracket or a multi-channel card should verify requirements before ordering.

Přednosti

  • Single-channel 2 Gb Fibre Channel connectivity via 64-bit 66 MHz PCI bus
  • Standard bracket fits typical server chassis slots
  • Lightweight 5.1 oz design reduces chassis load
  • Compact 6.6" length allows dense slot population

Specifikace

BrandEMULEX

Otázky k tomuto produktu

How can I confirm the Emulex LP9002L-F2 HBA is operating correctly after installation?

Check the server BIOS or operating system device manager to verify the 2Gb single-channel Fibre Channel adapter is detected at 64-bit 66MHz on the PCI bus and that the link light shows an active connection to the fabric.

What does the Emulex LP9002L-F2 package contain and what must I source separately?

The box includes the LP9002L-F2 host bus adapter with a standard bracket installed; you will need to provide a compatible PCI slot, a fibre-optic cable with the correct connector type, and any required driver software for your operating system.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.