Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green PCI fibre channel card with metal bracket and gold edge connector

Emulex

Emulex LP9002L-F2 2Gb Single Channel 64Bit 66Mhz PCI Fibre Channel HBA Standard Bracket

SKU CH-6ESF-SE90E

Adds a single 2 Gb Fibre Channel link to servers using a 64-bit 66 MHz PCI slot with a standard bracket

  • Single-channel 2 Gb Fibre Channel connectivity via 64-bit 66 MHz PCI bus
  • Standard bracket fits typical server chassis slots
  • Lightweight 5.1 oz design reduces chassis load
  • Compact 6.6" length allows dense slot population

Emulex LP9002L-F2 Fibre Channel HBA

This Emulex Lightpulse host bus adapter provides a single 2Gb Fibre Channel connection over a 64Bit 66Mhz PCI bus. It is intended for servers that need to attach to a storage-area network using legacy PCI slots. The card ships with a standard bracket and no additional accessories.

PCI slot installation and compatibility notes

The adapter fits a standard 64Bit 66Mhz PCI slot and uses the supplied bracket for secure mounting. Physical dimensions are 6.6" length, 2.6" width and 1" height with a weight of 5.1 units. Buyers who need a low-profile bracket or a multi-channel card should verify requirements before ordering.

Puncte forte

  • Single-channel 2 Gb Fibre Channel connectivity via 64-bit 66 MHz PCI bus
  • Standard bracket fits typical server chassis slots
  • Lightweight 5.1 oz design reduces chassis load
  • Compact 6.6" length allows dense slot population

Specificații

BrandEMULEX

Întrebări despre acest articol

How can I confirm the Emulex LP9002L-F2 HBA is operating correctly after installation?

Check the server BIOS or operating system device manager to verify the 2Gb single-channel Fibre Channel adapter is detected at 64-bit 66MHz on the PCI bus and that the link light shows an active connection to the fabric.

What does the Emulex LP9002L-F2 package contain and what must I source separately?

The box includes the LP9002L-F2 host bus adapter with a standard bracket installed; you will need to provide a compatible PCI slot, a fibre-optic cable with the correct connector type, and any required driver software for your operating system.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.