Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green PCI fibre channel card with metal bracket and gold edge connector

Emulex

Emulex LP9002L-F2 2Gb Single Channel 64Bit 66Mhz PCI Fibre Channel HBA Standard Bracket

SKU CH-6ESF-SE90E

Adds a single 2 Gb Fibre Channel link to servers using a 64-bit 66 MHz PCI slot with a standard bracket

  • Single-channel 2 Gb Fibre Channel connectivity via 64-bit 66 MHz PCI bus
  • Standard bracket fits typical server chassis slots
  • Lightweight 5.1 oz design reduces chassis load
  • Compact 6.6" length allows dense slot population

Emulex LP9002L-F2 Fibre Channel HBA

This Emulex Lightpulse host bus adapter provides a single 2Gb Fibre Channel connection over a 64Bit 66Mhz PCI bus. It is intended for servers that need to attach to a storage-area network using legacy PCI slots. The card ships with a standard bracket and no additional accessories.

PCI slot installation and compatibility notes

The adapter fits a standard 64Bit 66Mhz PCI slot and uses the supplied bracket for secure mounting. Physical dimensions are 6.6" length, 2.6" width and 1" height with a weight of 5.1 units. Buyers who need a low-profile bracket or a multi-channel card should verify requirements before ordering.

I korthet

  • Single-channel 2 Gb Fibre Channel connectivity via 64-bit 66 MHz PCI bus
  • Standard bracket fits typical server chassis slots
  • Lightweight 5.1 oz design reduces chassis load
  • Compact 6.6" length allows dense slot population

Specifikationer

BrandEMULEX

Frågor om den här produkten

How can I confirm the Emulex LP9002L-F2 HBA is operating correctly after installation?

Check the server BIOS or operating system device manager to verify the 2Gb single-channel Fibre Channel adapter is detected at 64-bit 66MHz on the PCI bus and that the link light shows an active connection to the fabric.

What does the Emulex LP9002L-F2 package contain and what must I source separately?

The box includes the LP9002L-F2 host bus adapter with a standard bracket installed; you will need to provide a compatible PCI slot, a fibre-optic cable with the correct connector type, and any required driver software for your operating system.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.