SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
EN-Labs
Converts SATA-bus M.2 2280, 2260, 2242 or 2230 Key B/B+M SSDs into a 2.5" SATA III drive with a protective metal enclosure
This enclosure converts a SATA-bus M.2 NGFF SSD into a standard 2.5 inch SATA III drive for laptops or desktops. It is built for users who have a Key B or Key B+M module and want to use it in a system with a 2.5 inch SATA bay.
The metal housing accepts M.2 modules in 2230, 2242, 2260 and 2280 lengths and secures them inside a 7 mm thick 2.5 inch frame. It requires a SATA data and power connection from the host and frees the builder from needing a dedicated M.2 slot on the motherboard.
The passive metal enclosure dissipates heat from the installed SSD without any moving parts, so it adds no audible noise. Power draw is limited to the drive itself through the SATA interface, with no additional circuitry to increase consumption.
| Brand | En-Labs |
|---|---|
| Model | ENM22SATA3 |
| Color | Black |
| Size | 2.5" |
| Type | Enclosure |
| Material | Metal |
| Internal Interface | M.2 |
| External Interface | SATA |
| Features | Only fit for SATA-bus NGFF M.2 SSD with Key B/B+M,Can't fit for PCIe NVMe / PCIe AHCI NGFF M.2 SSD with Key M, Pls check your M.2 SSD type before place order. Added protection for your SSD with enclosed housing Convert an m.2 NGFF solid-state drive into a Standard 2.5in SATA III 6Gbps SSD Idea for add a Key B / Key B+M NGFF M.2 SSD for your Laptop / Desktop Computer Support SATA-bus NGFF M.2 2280 / 2260 / 2242 / 2230 SSD with key B or key B+M Only (Note: This item can not fit with PCIe NVMe / PCIe AHCI M.2 Internal SSD with key M) Install an M.2 NGFF SSD into a SATA-enabled computer |
The metal housing acts as a passive heatsink for the 2280, 2260, 2242 or 2230 M.2 SATA SSD. No fan is included, so sustained heavy writes will warm the case but stay within normal SATA drive limits.
It draws power directly from the host SATA port — no external supply is needed. Consumption matches the installed M.2 SATA SSD, typically well under the 5 V SATA rail budget.
Only SATA-bus NGFF drives in 2280, 2260, 2242 or 2230 lengths with Key B or Key B+M. PCIe NVMe or Key M drives are physically incompatible and will not work.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Ekkert tungumál fannst.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?