SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.
EN-Labs
Converts SATA-bus M.2 2280, 2260, 2242 or 2230 Key B/B+M SSDs into a 2.5" SATA III drive with a protective metal enclosure
This enclosure converts a SATA-bus M.2 NGFF SSD into a standard 2.5 inch SATA III drive for laptops or desktops. It is built for users who have a Key B or Key B+M module and want to use it in a system with a 2.5 inch SATA bay.
The metal housing accepts M.2 modules in 2230, 2242, 2260 and 2280 lengths and secures them inside a 7 mm thick 2.5 inch frame. It requires a SATA data and power connection from the host and frees the builder from needing a dedicated M.2 slot on the motherboard.
The passive metal enclosure dissipates heat from the installed SSD without any moving parts, so it adds no audible noise. Power draw is limited to the drive itself through the SATA interface, with no additional circuitry to increase consumption.
| Brand | En-Labs |
|---|---|
| Model | ENM22SATA3 |
| Color | Black |
| Size | 2.5" |
| Type | Enclosure |
| Material | Metal |
| Internal Interface | M.2 |
| External Interface | SATA |
| Features | Only fit for SATA-bus NGFF M.2 SSD with Key B/B+M,Can't fit for PCIe NVMe / PCIe AHCI NGFF M.2 SSD with Key M, Pls check your M.2 SSD type before place order. Added protection for your SSD with enclosed housing Convert an m.2 NGFF solid-state drive into a Standard 2.5in SATA III 6Gbps SSD Idea for add a Key B / Key B+M NGFF M.2 SSD for your Laptop / Desktop Computer Support SATA-bus NGFF M.2 2280 / 2260 / 2242 / 2230 SSD with key B or key B+M Only (Note: This item can not fit with PCIe NVMe / PCIe AHCI M.2 Internal SSD with key M) Install an M.2 NGFF SSD into a SATA-enabled computer |
The metal housing acts as a passive heatsink for the 2280, 2260, 2242 or 2230 M.2 SATA SSD. No fan is included, so sustained heavy writes will warm the case but stay within normal SATA drive limits.
It draws power directly from the host SATA port — no external supply is needed. Consumption matches the installed M.2 SATA SSD, typically well under the 5 V SATA rail budget.
Only SATA-bus NGFF drives in 2280, 2260, 2242 or 2230 lengths with Key B or Key B+M. PCIe NVMe or Key M drives are physically incompatible and will not work.
Také v této kategorii
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
Měna, ve které platíte, a měna, ve které se zobrazují ceny.
Odesláno z vaší peněženky u pokladny
Pouze pro zobrazení — katalog je veden v dolarech
Žádná měna neodpovídá.
Vyberte jazyk, ve kterém s vámi bude web komunikovat.
Žádný jazyk neodpovídá.
Poprvé tady?
Už účet máte?
Neexistuje žádná automatická obnova hesla: tento obchod neposílá žádné e-maily, takže neexistuje jednorázový odkaz, o který by bylo možné požádat. Nechte adresu uvedenou u účtu, vyřídíme ji ručně.
Žádost zaznamenána
Do vaší schránky nic nedorazí — tento obchod neposílá žádné e-maily. Někdo se o to postará ručně.
Vzpomněli jste si?