SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
EN-Labs
Converts SATA-bus M.2 2280, 2260, 2242 or 2230 Key B/B+M SSDs into a 2.5" SATA III drive with a protective metal enclosure
This enclosure converts a SATA-bus M.2 NGFF SSD into a standard 2.5 inch SATA III drive for laptops or desktops. It is built for users who have a Key B or Key B+M module and want to use it in a system with a 2.5 inch SATA bay.
The metal housing accepts M.2 modules in 2230, 2242, 2260 and 2280 lengths and secures them inside a 7 mm thick 2.5 inch frame. It requires a SATA data and power connection from the host and frees the builder from needing a dedicated M.2 slot on the motherboard.
The passive metal enclosure dissipates heat from the installed SSD without any moving parts, so it adds no audible noise. Power draw is limited to the drive itself through the SATA interface, with no additional circuitry to increase consumption.
| Brand | En-Labs |
|---|---|
| Model | ENM22SATA3 |
| Color | Black |
| Size | 2.5" |
| Type | Enclosure |
| Material | Metal |
| Internal Interface | M.2 |
| External Interface | SATA |
| Features | Only fit for SATA-bus NGFF M.2 SSD with Key B/B+M,Can't fit for PCIe NVMe / PCIe AHCI NGFF M.2 SSD with Key M, Pls check your M.2 SSD type before place order. Added protection for your SSD with enclosed housing Convert an m.2 NGFF solid-state drive into a Standard 2.5in SATA III 6Gbps SSD Idea for add a Key B / Key B+M NGFF M.2 SSD for your Laptop / Desktop Computer Support SATA-bus NGFF M.2 2280 / 2260 / 2242 / 2230 SSD with key B or key B+M Only (Note: This item can not fit with PCIe NVMe / PCIe AHCI M.2 Internal SSD with key M) Install an M.2 NGFF SSD into a SATA-enabled computer |
The metal housing acts as a passive heatsink for the 2280, 2260, 2242 or 2230 M.2 SATA SSD. No fan is included, so sustained heavy writes will warm the case but stay within normal SATA drive limits.
It draws power directly from the host SATA port — no external supply is needed. Consumption matches the installed M.2 SATA SSD, typically well under the 5 V SATA rail budget.
Only SATA-bus NGFF drives in 2280, 2260, 2242 or 2230 lengths with Key B or Key B+M. PCIe NVMe or Key M drives are physically incompatible and will not work.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?