Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Silver rectangular server PSU with rear fan grille and power socket

godream

godream 350W Server Power Supply T320 T420 0DF83C DF83C F350E-S0 DH350E-S0 Dps-350ab-19 A

SKU CH-TAR2-0KPN8

350-watt non-redundant server power supply compatible with T320 and T420 systems

  • TypeATX
  • 350W output powers Dell T320 and T420 servers
  • Non-redundant design fits single PSU chassis slots
  • Tested working before dispatch for immediate deployment
  • Replaces multiple part numbers including 0DF83C and F350E-S0

Dell T320 T420 server power supply

This 350 W unit fits Dell PowerEdge T320 and T420 servers using part numbers 0DF83C, DF83C, F350E-S0, DH350E-S0 or DPS-350AB-19 A. It is a non-redundant ATX-type supply tested as working and listed as new condition. The supply replaces a failed or missing original unit in those specific chassis.

Non-redundant replacement for single PSU

The module suits builds that run a single power supply rather than a redundant pair, so it does not add failover capability. Buyers needing hot-swap redundancy or higher wattage for expanded hardware should look for a redundant-rated or higher-output alternative.

Helstu kostir

  • 350W output powers Dell T320 and T420 servers
  • Non-redundant design fits single PSU chassis slots
  • Tested working before dispatch for immediate deployment
  • Replaces multiple part numbers including 0DF83C and F350E-S0

Tæknilýsing

TypeATX

Spurningar um þessa vöru

What chassis models does this 350W unit fit?

It is listed for T320 and T420 server chassis and matches part numbers 0DF83C, DF83C, F350E-S0, DH350E-S0 and Dps-350ab-19 A.

Which power connector must be seated first during installation?

The main ATX connector must be fully latched before the auxiliary CPU power lead is attached; reversing the order often leaves the 24-pin loose.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.