Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

godream

godream 350W Server Power Supply T320 T420 0DF83C DF83C F350E-S0 DH350E-S0 Dps-350ab-19 A

SKU CH-TAR2-0KPN8

350-watt non-redundant server power supply compatible with T320 and T420 systems

  • TypeATX
  • 350W output powers Dell T320 and T420 servers
  • Non-redundant design fits single PSU chassis slots
  • Tested working before dispatch for immediate deployment
  • Replaces multiple part numbers including 0DF83C and F350E-S0

Dell T320 T420 server power supply

This 350 W unit fits Dell PowerEdge T320 and T420 servers using part numbers 0DF83C, DF83C, F350E-S0, DH350E-S0 or DPS-350AB-19 A. It is a non-redundant ATX-type supply tested as working and listed as new condition. The supply replaces a failed or missing original unit in those specific chassis.

Non-redundant replacement for single PSU

The module suits builds that run a single power supply rather than a redundant pair, so it does not add failover capability. Buyers needing hot-swap redundancy or higher wattage for expanded hardware should look for a redundant-rated or higher-output alternative.

Kohokohdat

  • 350W output powers Dell T320 and T420 servers
  • Non-redundant design fits single PSU chassis slots
  • Tested working before dispatch for immediate deployment
  • Replaces multiple part numbers including 0DF83C and F350E-S0

Tekniset tiedot

TypeATX

Kysymyksiä tästä tuotteesta

What chassis models does this 350W unit fit?

It is listed for T320 and T420 server chassis and matches part numbers 0DF83C, DF83C, F350E-S0, DH350E-S0 and Dps-350ab-19 A.

Which power connector must be seated first during installation?

The main ATX connector must be fully latched before the auxiliary CPU power lead is attached; reversing the order often leaves the 24-pin loose.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.