Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Silver rectangular server PSU with rear fan grille and power socket

godream

godream 350W Server Power Supply T320 T420 0DF83C DF83C F350E-S0 DH350E-S0 Dps-350ab-19 A

SKU CH-TAR2-0KPN8

350-watt non-redundant server power supply compatible with T320 and T420 systems

  • TypeATX
  • 350W output powers Dell T320 and T420 servers
  • Non-redundant design fits single PSU chassis slots
  • Tested working before dispatch for immediate deployment
  • Replaces multiple part numbers including 0DF83C and F350E-S0

Dell T320 T420 server power supply

This 350 W unit fits Dell PowerEdge T320 and T420 servers using part numbers 0DF83C, DF83C, F350E-S0, DH350E-S0 or DPS-350AB-19 A. It is a non-redundant ATX-type supply tested as working and listed as new condition. The supply replaces a failed or missing original unit in those specific chassis.

Non-redundant replacement for single PSU

The module suits builds that run a single power supply rather than a redundant pair, so it does not add failover capability. Buyers needing hot-swap redundancy or higher wattage for expanded hardware should look for a redundant-rated or higher-output alternative.

Pluspunten

  • 350W output powers Dell T320 and T420 servers
  • Non-redundant design fits single PSU chassis slots
  • Tested working before dispatch for immediate deployment
  • Replaces multiple part numbers including 0DF83C and F350E-S0

Specificaties

TypeATX

Vragen over dit artikel

What chassis models does this 350W unit fit?

It is listed for T320 and T420 server chassis and matches part numbers 0DF83C, DF83C, F350E-S0, DH350E-S0 and Dps-350ab-19 A.

Which power connector must be seated first during installation?

The main ATX connector must be fully latched before the auxiliary CPU power lead is attached; reversing the order often leaves the 24-pin loose.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.