เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน

สินค้าที่ติดตาม เข้าสู่ระบบ

godream

godream 350W Server Power Supply T320 T420 0DF83C DF83C F350E-S0 DH350E-S0 Dps-350ab-19 A

SKU CH-TAR2-0KPN8

350-watt non-redundant server power supply compatible with T320 and T420 systems

  • TypeATX
  • 350W output powers Dell T320 and T420 servers
  • Non-redundant design fits single PSU chassis slots
  • Tested working before dispatch for immediate deployment
  • Replaces multiple part numbers including 0DF83C and F350E-S0

Dell T320 T420 server power supply

This 350 W unit fits Dell PowerEdge T320 and T420 servers using part numbers 0DF83C, DF83C, F350E-S0, DH350E-S0 or DPS-350AB-19 A. It is a non-redundant ATX-type supply tested as working and listed as new condition. The supply replaces a failed or missing original unit in those specific chassis.

Non-redundant replacement for single PSU

The module suits builds that run a single power supply rather than a redundant pair, so it does not add failover capability. Buyers needing hot-swap redundancy or higher wattage for expanded hardware should look for a redundant-rated or higher-output alternative.

จุดเด่น

  • 350W output powers Dell T320 and T420 servers
  • Non-redundant design fits single PSU chassis slots
  • Tested working before dispatch for immediate deployment
  • Replaces multiple part numbers including 0DF83C and F350E-S0

ข้อมูลจำเพาะ

TypeATX

คำถามเกี่ยวกับสินค้านี้

What chassis models does this 350W unit fit?

It is listed for T320 and T420 server chassis and matches part numbers 0DF83C, DF83C, F350E-S0, DH350E-S0 and Dps-350ab-19 A.

Which power connector must be seated first during installation?

The main ATX connector must be fully latched before the auxiliary CPU power lead is attached; reversing the order often leaves the 24-pin loose.

อื่น ๆ ในหมวดนี้

ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้

หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที