Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Silver 2U rack server with rail kit, front drive bays and dual power supplies

HPE

HPE ProLiant DL380 Gen10 2U rack server Dual Xeon Gold 6130 2.10 GHz 256GB 30.72TB

SKU CH-YTC7-VD294

2U rack server with dual 16-core Xeon Gold 6130 CPUs, 256 GB DDR4 memory and 30.72 TB of enterprise SATA SSDs

  • TypeRack
  • Dual 16-core Xeon Gold 6130 CPUs deliver high multi-thread throughput up to 3.70 GHz turbo
  • 256 GB DDR4 3200 MHz memory supports large virtualisation and database workloads
  • 72 TB enterprise SATA SSD storage provides ultra-fast capacity for critical data
  • Redundant hot-swap power supplies keep the server running during a module failure
  • iLO 5 remote management enables out-of-band control and monitoring from anywhere

Dual Xeon Gold 6130 16-core server

The HPE ProLiant DL380 Gen10 is a 2U rack server built for enterprise workloads. It ships with two Xeon Gold 6130 processors, each running at 2.10 GHz with up to 3.70 GHz turbo. The system targets organisations running databases, virtualisation and heavy simultaneous applications.

256GB DDR4 and 30.72TB SSD capacity

Memory comes as eight 32GB DDR4 modules at 3200MHz, giving 256GB total for large memory footprints. Storage uses four 7.68TB 2.5-inch SATA III SSDs providing 30.72TB of raw capacity. Both memory and drives are supplied separately and require installation before use.

SATA III and 10GbE interface limits

The P408i-a controller with Smart Storage Battery manages the SATA III 6Gb/s drives, so throughput is bounded by that interface. Network connectivity is a Broadcom BCM57416 dual-port 10Gb BASE-T OCP3 adapter. Redundant hot-swappable power supplies keep the server running during a module swap.

Helstu kostir

  • Dual 16-core Xeon Gold 6130 CPUs deliver high multi-thread throughput up to 3.70 GHz turbo
  • 256 GB DDR4 3200 MHz memory supports large virtualisation and database workloads
  • 72 TB enterprise SATA SSD storage provides ultra-fast capacity for critical data
  • Redundant hot-swap power supplies keep the server running during a module failure
  • iLO 5 remote management enables out-of-band control and monitoring from anywhere

Tæknilýsing

TypeRack

Spurningar um þessa vöru

Will the 10Gb BASE-T OCP3 network controller work with my existing 1Gb switches?

The Broadcom BCM57416 10Gb 2-port BASE-T OCP3 controller is backward compatible with 1Gb Ethernet switches, so it will operate on your current network infrastructure at 1Gb speeds until you upgrade.

How can I confirm the P408i-a storage controller sees all four 7.68TB SSDs after installation?

After installing the drives, check the P408i-a/2GB controller BIOS during boot or use the iLO 5 remote management interface to verify all four 7.68TB SATA SSDs are detected and configured in the desired RAID array.

Does the shipment include the 256GB DDR4 memory and 30.72TB SSDs pre-installed, or must I fit them myself?

The 256GB (8 x 32GB) DDR4 3200MHz memory modules and four 7.68TB SATA SSDs are included but shipped separately; you must install them into the server before use.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.