Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się

HPE

HPE ProLiant DL380 Gen10 2U rack server Dual Xeon Gold 6130 2.10 GHz 256GB 30.72TB

SKU CH-YTC7-VD294

2U rack server with dual 16-core Xeon Gold 6130 CPUs, 256 GB DDR4 memory and 30.72 TB of enterprise SATA SSDs

  • TypeRack
  • Dual 16-core Xeon Gold 6130 CPUs deliver high multi-thread throughput up to 3.70 GHz turbo
  • 256 GB DDR4 3200 MHz memory supports large virtualisation and database workloads
  • 72 TB enterprise SATA SSD storage provides ultra-fast capacity for critical data
  • Redundant hot-swap power supplies keep the server running during a module failure
  • iLO 5 remote management enables out-of-band control and monitoring from anywhere

Dual Xeon Gold 6130 16-core server

The HPE ProLiant DL380 Gen10 is a 2U rack server built for enterprise workloads. It ships with two Xeon Gold 6130 processors, each running at 2.10 GHz with up to 3.70 GHz turbo. The system targets organisations running databases, virtualisation and heavy simultaneous applications.

256GB DDR4 and 30.72TB SSD capacity

Memory comes as eight 32GB DDR4 modules at 3200MHz, giving 256GB total for large memory footprints. Storage uses four 7.68TB 2.5-inch SATA III SSDs providing 30.72TB of raw capacity. Both memory and drives are supplied separately and require installation before use.

SATA III and 10GbE interface limits

The P408i-a controller with Smart Storage Battery manages the SATA III 6Gb/s drives, so throughput is bounded by that interface. Network connectivity is a Broadcom BCM57416 dual-port 10Gb BASE-T OCP3 adapter. Redundant hot-swappable power supplies keep the server running during a module swap.

Najważniejsze cechy

  • Dual 16-core Xeon Gold 6130 CPUs deliver high multi-thread throughput up to 3.70 GHz turbo
  • 256 GB DDR4 3200 MHz memory supports large virtualisation and database workloads
  • 72 TB enterprise SATA SSD storage provides ultra-fast capacity for critical data
  • Redundant hot-swap power supplies keep the server running during a module failure
  • iLO 5 remote management enables out-of-band control and monitoring from anywhere

Specyfikacja

TypeRack

Pytania dotyczące tego produktu

Will the 10Gb BASE-T OCP3 network controller work with my existing 1Gb switches?

The Broadcom BCM57416 10Gb 2-port BASE-T OCP3 controller is backward compatible with 1Gb Ethernet switches, so it will operate on your current network infrastructure at 1Gb speeds until you upgrade.

How can I confirm the P408i-a storage controller sees all four 7.68TB SSDs after installation?

After installing the drives, check the P408i-a/2GB controller BIOS during boot or use the iLO 5 remote management interface to verify all four 7.68TB SATA SSDs are detected and configured in the desired RAID array.

Does the shipment include the 256GB DDR4 memory and 30.72TB SSDs pre-installed, or must I fit them myself?

The 256GB (8 x 32GB) DDR4 3200MHz memory modules and four 7.68TB SATA SSDs are included but shipped separately; you must install them into the server before use.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.