Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Silver 2U rack server with rail kit, front drive bays and dual power supplies

HPE

HPE ProLiant DL380 Gen10 2U rack server Dual Xeon Gold 6130 2.10 GHz 256GB 30.72TB

SKU CH-YTC7-VD294

2U rack server with dual 16-core Xeon Gold 6130 CPUs, 256 GB DDR4 memory and 30.72 TB of enterprise SATA SSDs

  • TypeRack
  • Dual 16-core Xeon Gold 6130 CPUs deliver high multi-thread throughput up to 3.70 GHz turbo
  • 256 GB DDR4 3200 MHz memory supports large virtualisation and database workloads
  • 72 TB enterprise SATA SSD storage provides ultra-fast capacity for critical data
  • Redundant hot-swap power supplies keep the server running during a module failure
  • iLO 5 remote management enables out-of-band control and monitoring from anywhere

Dual Xeon Gold 6130 16-core server

The HPE ProLiant DL380 Gen10 is a 2U rack server built for enterprise workloads. It ships with two Xeon Gold 6130 processors, each running at 2.10 GHz with up to 3.70 GHz turbo. The system targets organisations running databases, virtualisation and heavy simultaneous applications.

256GB DDR4 and 30.72TB SSD capacity

Memory comes as eight 32GB DDR4 modules at 3200MHz, giving 256GB total for large memory footprints. Storage uses four 7.68TB 2.5-inch SATA III SSDs providing 30.72TB of raw capacity. Both memory and drives are supplied separately and require installation before use.

SATA III and 10GbE interface limits

The P408i-a controller with Smart Storage Battery manages the SATA III 6Gb/s drives, so throughput is bounded by that interface. Network connectivity is a Broadcom BCM57416 dual-port 10Gb BASE-T OCP3 adapter. Redundant hot-swappable power supplies keep the server running during a module swap.

Puncte forte

  • Dual 16-core Xeon Gold 6130 CPUs deliver high multi-thread throughput up to 3.70 GHz turbo
  • 256 GB DDR4 3200 MHz memory supports large virtualisation and database workloads
  • 72 TB enterprise SATA SSD storage provides ultra-fast capacity for critical data
  • Redundant hot-swap power supplies keep the server running during a module failure
  • iLO 5 remote management enables out-of-band control and monitoring from anywhere

Specificații

TypeRack

Întrebări despre acest articol

Will the 10Gb BASE-T OCP3 network controller work with my existing 1Gb switches?

The Broadcom BCM57416 10Gb 2-port BASE-T OCP3 controller is backward compatible with 1Gb Ethernet switches, so it will operate on your current network infrastructure at 1Gb speeds until you upgrade.

How can I confirm the P408i-a storage controller sees all four 7.68TB SSDs after installation?

After installing the drives, check the P408i-a/2GB controller BIOS during boot or use the iLO 5 remote management interface to verify all four 7.68TB SATA SSDs are detected and configured in the desired RAID array.

Does the shipment include the 256GB DDR4 memory and 30.72TB SSDs pre-installed, or must I fit them myself?

The 256GB (8 x 32GB) DDR4 3200MHz memory modules and four 7.68TB SATA SSDs are included but shipped separately; you must install them into the server before use.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.