Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green circuit board adapter with gold SATA connector and mSATA slot, 9.5x4.5 cm

JacobsParts Inc.

JacobsParts Protronix mSATA 50mm to 2.5" SATA Adapter

SKU CH-8HFC-MQ8JA

Converts a 50 mm mSATA SSD to a 2.5 inch SATA drive with included mounting hardware and onboard power regulation

  • Cable LengthNONE
  • Changer TypeSATA
  • Connect 50 mm mSATA SSD to 2.5" SATA bay
  • No performance penalty with SATA interface
  • Stable power from two capacitors and linear regulator
  • Mount securely with included screws and nuts
  • Compact 9.5 x 4.5 cm board fits tight spaces

Connect 50mm mSATA to 2.5" SATA

This adapter lets you install a 50mm mSATA SSD into a standard 2.5" SATA drive bay. It draws power through the SATA connection and includes capacitors with a linear regulator for stable operation. Mounting screws and nuts are supplied for internal fitting. Dimensions are 9.5x4.5 cm.

Suits desktops needing mSATA storage

Builders adding an mSATA drive to a desktop SATA port can use this converter. Laptop users may also employ it if they can secure the board safely. Buyers with drives longer than 50mm, or systems lacking a free SATA data and power connector, cannot use this adapter.

50mm mSATA form factor required

The board accepts only standard 50mm mSATA solid-state drives. Any other length or a different interface will not fit or function. Verify your SSD matches this exact size before purchase.

Helstu kostir

  • Connect 50 mm mSATA SSD to 2.5" SATA bay
  • No performance penalty with SATA interface
  • Stable power from two capacitors and linear regulator
  • Mount securely with included screws and nuts
  • Compact 9.5 x 4.5 cm board fits tight spaces

Tæknilýsing

BrandJacobsparts
ModelADP-mSATA
Cable LengthNONE
Changer TypeSATA

Spurningar um þessa vöru

Does the adapter generate extra heat or noise when the mSATA SSD runs continuously in a desktop?

The passive board adds no fan or active circuitry, so it contributes no audible noise and negligible heat beyond the SSD itself.

What mounting hardware must I already have to secure the 50 mm mSATA drive inside a 2.5 inch bay?

Screws and nuts are included with the adapter, so no extra mounting kit is required.

Will this adapter work with an older motherboard that only supports SATA I or SATA II speeds?

Yes, it is compatible with all SATA revisions, so the drive will operate at the maximum speed the motherboard allows.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.