Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green circuit board adapter with gold SATA connector and mSATA slot, 9.5x4.5 cm

JacobsParts Inc.

JacobsParts Protronix mSATA 50mm to 2.5" SATA Adapter

SKU CH-8HFC-MQ8JA

Converts a 50 mm mSATA SSD to a 2.5 inch SATA drive with included mounting hardware and onboard power regulation

  • Cable LengthNONE
  • Changer TypeSATA
  • Connect 50 mm mSATA SSD to 2.5" SATA bay
  • No performance penalty with SATA interface
  • Stable power from two capacitors and linear regulator
  • Mount securely with included screws and nuts
  • Compact 9.5 x 4.5 cm board fits tight spaces

Connect 50mm mSATA to 2.5" SATA

This adapter lets you install a 50mm mSATA SSD into a standard 2.5" SATA drive bay. It draws power through the SATA connection and includes capacitors with a linear regulator for stable operation. Mounting screws and nuts are supplied for internal fitting. Dimensions are 9.5x4.5 cm.

Suits desktops needing mSATA storage

Builders adding an mSATA drive to a desktop SATA port can use this converter. Laptop users may also employ it if they can secure the board safely. Buyers with drives longer than 50mm, or systems lacking a free SATA data and power connector, cannot use this adapter.

50mm mSATA form factor required

The board accepts only standard 50mm mSATA solid-state drives. Any other length or a different interface will not fit or function. Verify your SSD matches this exact size before purchase.

Prednosti

  • Connect 50 mm mSATA SSD to 2.5" SATA bay
  • No performance penalty with SATA interface
  • Stable power from two capacitors and linear regulator
  • Mount securely with included screws and nuts
  • Compact 9.5 x 4.5 cm board fits tight spaces

Špecifikácie

BrandJacobsparts
ModelADP-mSATA
Cable LengthNONE
Changer TypeSATA

Otázky k tomuto produktu

Does the adapter generate extra heat or noise when the mSATA SSD runs continuously in a desktop?

The passive board adds no fan or active circuitry, so it contributes no audible noise and negligible heat beyond the SSD itself.

What mounting hardware must I already have to secure the 50 mm mSATA drive inside a 2.5 inch bay?

Screws and nuts are included with the adapter, so no extra mounting kit is required.

Will this adapter work with an older motherboard that only supports SATA I or SATA II speeds?

Yes, it is compatible with all SATA revisions, so the drive will operate at the maximum speed the motherboard allows.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.