Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board adapter with gold SATA connector and mSATA slot, 9.5x4.5 cm

JacobsParts Inc.

JacobsParts Protronix mSATA 50mm to 2.5" SATA Adapter

SKU CH-8HFC-MQ8JA

Converts a 50 mm mSATA SSD to a 2.5 inch SATA drive with included mounting hardware and onboard power regulation

  • Cable LengthNONE
  • Changer TypeSATA
  • Connect 50 mm mSATA SSD to 2.5" SATA bay
  • No performance penalty with SATA interface
  • Stable power from two capacitors and linear regulator
  • Mount securely with included screws and nuts
  • Compact 9.5 x 4.5 cm board fits tight spaces

Connect 50mm mSATA to 2.5" SATA

This adapter lets you install a 50mm mSATA SSD into a standard 2.5" SATA drive bay. It draws power through the SATA connection and includes capacitors with a linear regulator for stable operation. Mounting screws and nuts are supplied for internal fitting. Dimensions are 9.5x4.5 cm.

Suits desktops needing mSATA storage

Builders adding an mSATA drive to a desktop SATA port can use this converter. Laptop users may also employ it if they can secure the board safely. Buyers with drives longer than 50mm, or systems lacking a free SATA data and power connector, cannot use this adapter.

50mm mSATA form factor required

The board accepts only standard 50mm mSATA solid-state drives. Any other length or a different interface will not fit or function. Verify your SSD matches this exact size before purchase.

Pluspunten

  • Connect 50 mm mSATA SSD to 2.5" SATA bay
  • No performance penalty with SATA interface
  • Stable power from two capacitors and linear regulator
  • Mount securely with included screws and nuts
  • Compact 9.5 x 4.5 cm board fits tight spaces

Specificaties

BrandJacobsparts
ModelADP-mSATA
Cable LengthNONE
Changer TypeSATA

Vragen over dit artikel

Does the adapter generate extra heat or noise when the mSATA SSD runs continuously in a desktop?

The passive board adds no fan or active circuitry, so it contributes no audible noise and negligible heat beyond the SSD itself.

What mounting hardware must I already have to secure the 50 mm mSATA drive inside a 2.5 inch bay?

Screws and nuts are included with the adapter, so no extra mounting kit is required.

Will this adapter work with an older motherboard that only supports SATA I or SATA II speeds?

Yes, it is compatible with all SATA revisions, so the drive will operate at the maximum speed the motherboard allows.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.