暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board adapter with gold SATA connector and mSATA slot, 9.5x4.5 cm

JacobsParts Inc.

JacobsParts Protronix mSATA 50mm to 2.5" SATA Adapter

SKU CH-8HFC-MQ8JA

Converts a 50 mm mSATA SSD to a 2.5 inch SATA drive with included mounting hardware and onboard power regulation

  • Cable LengthNONE
  • Changer TypeSATA
  • Connect 50 mm mSATA SSD to 2.5" SATA bay
  • No performance penalty with SATA interface
  • Stable power from two capacitors and linear regulator
  • Mount securely with included screws and nuts
  • Compact 9.5 x 4.5 cm board fits tight spaces

Connect 50mm mSATA to 2.5" SATA

This adapter lets you install a 50mm mSATA SSD into a standard 2.5" SATA drive bay. It draws power through the SATA connection and includes capacitors with a linear regulator for stable operation. Mounting screws and nuts are supplied for internal fitting. Dimensions are 9.5x4.5 cm.

Suits desktops needing mSATA storage

Builders adding an mSATA drive to a desktop SATA port can use this converter. Laptop users may also employ it if they can secure the board safely. Buyers with drives longer than 50mm, or systems lacking a free SATA data and power connector, cannot use this adapter.

50mm mSATA form factor required

The board accepts only standard 50mm mSATA solid-state drives. Any other length or a different interface will not fit or function. Verify your SSD matches this exact size before purchase.

特長

  • Connect 50 mm mSATA SSD to 2.5" SATA bay
  • No performance penalty with SATA interface
  • Stable power from two capacitors and linear regulator
  • Mount securely with included screws and nuts
  • Compact 9.5 x 4.5 cm board fits tight spaces

仕様

BrandJacobsparts
ModelADP-mSATA
Cable LengthNONE
Changer TypeSATA

この商品に関する質問

Does the adapter generate extra heat or noise when the mSATA SSD runs continuously in a desktop?

The passive board adds no fan or active circuitry, so it contributes no audible noise and negligible heat beyond the SSD itself.

What mounting hardware must I already have to secure the 50 mm mSATA drive inside a 2.5 inch bay?

Screws and nuts are included with the adapter, so no extra mounting kit is required.

Will this adapter work with an older motherboard that only supports SATA I or SATA II speeds?

Yes, it is compatible with all SATA revisions, so the drive will operate at the maximum speed the motherboard allows.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。